Author: Nakai, H.
Paper Title Page
MOP062 Production of 500 MHz SRF Modules the KEKB-type for Taiwan Photon Source 263
 
  • Ch. Wang, L.-H. Chang, M.H. Chang, L.J. Chen, F.-T. Chung, M.-C. Lin, Y.-H. Lin, Z.K. Liu, C.H. Lo, M.H. Tsai, T.-T. Yang, M.-S. Yeh, T.-C. Yu
    NSRRC, Hsinchu, Taiwan
  • T. Furuya, K. Hara, T. Honma, A. Kabe, Y. Kojima, S. Mitsunobu, Y. Morita, H. Nakai, K. Nakanishi, M. Nishiwaki, S. Takano
    KEK, Ibaraki, Japan
  • F. Inoue, K. Sennyu, T. Yanagisawa
    MHI, Hiroshima, Japan
 
  The KEKB-type single-cell 500-MHz superconducting radio frequency (SRF) modules have been selected to power the 3 GeV, 500 mA, storage ring of the constructing Taiwan Photon Source (TPS) at National Synchrotron Radiation Research Center (NSRRC). The design target is to routinely deliver RF forward power up to 300 kW, CW, to single SRF module with highly reliable operation. Three sets of SRF modules have been successfully produced under a tight collaboration with High Energy Accelerator Research Organization (KEK) and Mitsubishi Heavy Industries Ltd. (MHI), after obtaining the technology transfer from KEK. MHI is responsible for the mechanical fabrication and cryo-module assembly, KEK for the surface and RF treatments of the niobium cavities, high power input couplers and HOM dampers and for the liquid-helium tests of the cryo-modules, and NSRRC for the electronic/diagnostic system, final assembly and system integration, high power horizontal test, and reliable test. This work reports the results obtained during the production of these three SRF modules at KEK and NSRRC.