SRF2013 - List of Authors (Jones, T.J.)

Paper	Title	Page
MOP086	Integration, Commissioning and Cryogenics Performance of the ERL Cryomodule Installed on ALICE-ERL Facility at STFC Daresbury Laboratory, UK	349
	S.M. Pattalwar, R.K. Buckley, P.A. Corlett, P. Goudket, A.R. Goulden, A.J. May, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom S.A. Belomestnykh BNL, Upton, Long Island, New York, USA A. Büchner, F.G. Gabriel, P. Michel HZDR, Dresden, Germany E.P. Chojnacki, J.V. Conway, R.G. Eichhorn, G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA M.A. Cordwell, T.J. Jones, L. Ma, A.J. Moss, J. Strachan STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom J.N. Corlett, D. Li, S.M. Lidia LBNL, Berkeley, California, USA T. Kimura Stanford University, Stanford, California, USA R.E. Laxdal TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada J.K. Sekutowicz DESY, Hamburg, Germany T.J. Smith SLAC, Menlo Park, California, USA
	On successful assembly and preliminary testing of an optimised SRF cryomodule for application on ERL accelerators, which is being developed through an international collaboration the cryomodule has been installed on the 35 MeV ALICE (Accelerators and Lasers in Combined Experiments) Energy Recovery Linac (ERL) facility at STFC Daresbury Laboratory. Existing cryogenic infrastructure has a capacity to deliver approximately 120 W cooling power at 2 K, but the HOM (Higher Order Mode) absorbers, the thermal intercepts for the high power RF couplers and the radiation shield in the cryomodule are designed to be cooled (to 5 K and 80 K) with gaseous helium instead of liquid nitrogen. As a result the cryogenic infrastructure for ALICE had to be modified to meet these additional requirements. In this paper we describe our experience with the process of integration and the cryogenic commissioning, and present some initial results.

MOP087	Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC	353
	S.M. Pattalwar, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom G. Burt Cockcroft Institute, Warrington, Cheshire, United Kingdom G. Burt Lancaster University, Lancaster, United Kingdom O. Capatina CERN, Geneva, Switzerland B.D.S. Hall Cockcroft Institute, Lancaster University, Lancaster, United Kingdom T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom T.J. Peterson Fermilab, Batavia, USA
	A prototype Superconducting (RF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. A series of boundary conditions influence the design of the cryomodule prototype, arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS and LHC tunnels. As a result, the design of the helium vessel and the cryomodule has become extremely challenging. This paper assesses some of the critical cryogenic and engineering design requirements and describes an optimised cryomodule solution for the tests with SPS.

THP036	Design of a 4 Rod Crab Cavity Cryomodule System for HL-LHC	982
	G. Burt, B.D.S. Hall Cockcroft Institute, Lancaster University, Lancaster, United Kingdom T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.J. Peterson Fermilab, Batavia, USA L.A. Wright CERN, Geneva, Switzerland
	The LHC requires compact SRF crab cavities for the HL-LHC and 3 potential solutions are under consideration. One option is to develop a 4 rod cavity utilising for quarter wave rods to maintain a dipole field. The cavity design has been developed including power and LOM/HOM couplers have been developed, as well as a conceptual design of a complete cryomodule system including ancillaries and this is presented. The cryomodule is designed to allow easy access during testing and uses a novel support system and contains the opposing beamline section to fit inside the LHC envelope.

Paper

Title

Page

Integration, Commissioning and Cryogenics Performance of the ERL Cryomodule Installed on ALICE-ERL Facility at STFC Daresbury Laboratory, UK

349

S.M. Pattalwar, R.K. Buckley, P.A. Corlett, P. Goudket, A.R. Goulden, A.J. May, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
S.A. Belomestnykh
BNL, Upton, Long Island, New York, USA
A. Büchner, F.G. Gabriel, P. Michel
HZDR, Dresden, Germany
E.P. Chojnacki, J.V. Conway, R.G. Eichhorn, G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
M.A. Cordwell, T.J. Jones, L. Ma, A.J. Moss, J. Strachan
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
J.N. Corlett, D. Li, S.M. Lidia
LBNL, Berkeley, California, USA
T. Kimura
Stanford University, Stanford, California, USA
R.E. Laxdal
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
J.K. Sekutowicz
DESY, Hamburg, Germany
T.J. Smith
SLAC, Menlo Park, California, USA

On successful assembly and preliminary testing of an optimised SRF cryomodule for application on ERL accelerators, which is being developed through an international collaboration the cryomodule has been installed on the 35 MeV ALICE (Accelerators and Lasers in Combined Experiments) Energy Recovery Linac (ERL) facility at STFC Daresbury Laboratory. Existing cryogenic infrastructure has a capacity to deliver approximately 120 W cooling power at 2 K, but the HOM (Higher Order Mode) absorbers, the thermal intercepts for the high power RF couplers and the radiation shield in the cryomodule are designed to be cooled (to 5 K and 80 K) with gaseous helium instead of liquid nitrogen. As a result the cryogenic infrastructure for ALICE had to be modified to meet these additional requirements. In this paper we describe our experience with the process of integration and the cryogenic commissioning, and present some initial results.

MOP087

Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC

353

S.M. Pattalwar, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
G. Burt
Cockcroft Institute, Warrington, Cheshire, United Kingdom
G. Burt
Lancaster University, Lancaster, United Kingdom
O. Capatina
CERN, Geneva, Switzerland
B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
T.J. Peterson
Fermilab, Batavia, USA

A prototype Superconducting (RF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. A series of boundary conditions influence the design of the cryomodule prototype, arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS and LHC tunnels. As a result, the design of the helium vessel and the cryomodule has become extremely challenging. This paper assesses some of the critical cryogenic and engineering design requirements and describes an optimised cryomodule solution for the tests with SPS.

THP036

Design of a 4 Rod Crab Cavity Cryomodule System for HL-LHC

982

G. Burt, B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.J. Peterson
Fermilab, Batavia, USA
L.A. Wright
CERN, Geneva, Switzerland

The LHC requires compact SRF crab cavities for the HL-LHC and 3 potential solutions are under consideration. One option is to develop a 4 rod cavity utilising for quarter wave rods to maintain a dipole field. The cavity design has been developed including power and LOM/HOM couplers have been developed, as well as a conceptual design of a complete cryomodule system including ancillaries and this is presented. The cryomodule is designed to allow easy access during testing and uses a novel support system and contains the opposing beamline section to fit inside the LHC envelope.