JLAB, Newport News, Virginia, USA
At SRF 2011 we presented the study of quenches in high gradient SRF cavities with dual mode excitation technique[*]. The data differed from measurements done in 80’s that indicated thermal breakdown nature of quenches in SRF cavities. In this contribution we present analysis of the data that indicates that our recent data for high gradient quenches is consistent with the magnetic breakdown on the defects with thermally suppressed critical field. From the parametric fits derived within the model we estimate the critical breakdown fields and RF resistances at the breakdown site.
[*] G. Eremeev et al.,. In Proceedings of the 15th Superconducting RF conference,pp. 746-749, July 2011.
JLAB, Newport News, Virginia, USA
RAS/INR, Moscow, Russia
DESY, Hamburg, Germany
One of the alternative manufacturing technologies for SRF cavities is hydroforming from seamless tubes. Although this technology has produced cavities with gradient and Q-values comparable to standard EBW/EP cavities, a few questions remain. One of these questions is whether the quench mechanism in hydroformed cavities is the same as in standard electron beam welded cavities. Towards this effort Jefferson Lab performed quench studies on 4 different seamless hydroformed cavities. These cavities include DESY’s – Z163 and Z164 nine-cell cavities, and Black Laboratories nine-cell and two-cell TESLA shaped cavities, hydroformed at DESY. Initial results from the cavities and quench localization were published in SRF2011*. In this report we will present post JLAB surface retreatment quench studies for each cavity. The data will include OST and T-mapping quench localization as well as quench location preheating analysis comparing them to the observations in standard electron beam welded cavities.
*W. Singer, A. Ermakov, G. Kreps, A. Matheisen, X. Singer, K. Twarowski, I. Zhelezov, P. Kneisel, R. Crooks, Proceedings of SRF2011, TUPO026 2011.
JLAB, Newport News, Virginia, USA
JLab, Newport News, Virginia, USA
BNL, Upton, Long Island, New York, USA
Within any thin film development program directed towards SRF accelerating structures, there is a need for an RF characterization device that can provide information about RF properties of small samples. The current installation of the RF characterization device at Jefferson Lab is Surface Impedance Characterization (SIC) system. The data acquisition environment for the system has recently been improved to allow for automated quicker measurement, and the system has been routinely used for characterization of bulk Nb, films of Nb on Cu, MgB2, NbTiN, Nb3Sn films, etc. We present some of the recent results that illustrate present capabilities and limitations of the system.
JLAB, Newport News, Virginia, USA
ODU, Norfolk, Virginia, USA
Alternative BCS superconductors with the superconducting critical temperature higher than that of niobium theoretically surpass the limitations of niobium. The feasibility of technology has been demonstrated at 1.5 GHz with Nb3Sn vapor deposition technique at Wuppertal University. The benefit at these frequencies is more pronounced at 4.2 K, where Nb3Sn coated cavities show RF resistances an order of magnitude lower than that of niobium. At Jefferson Lab we started the development of Nb3Sn vapor diffusion deposition system within an R&D development program towards compact light sources. Here we present the current progress of the system development.
JLAB, Newport News, Virginia, USA
Illinois Institute of Technology, Chicago, IL, USA
ANL, Argonne, USA
JLab, Newport News, Virginia, USA
UIC, Chicago, USA
In the pursuit of niobium (Nb) films with similar performance with the commonly used bulk Nb surfaces for Superconducting RF (SRF) applications, significant progress has been made with the development of energetic condensation deposition techniques. Using energetic condensation of ions extracted from plasma generated by Electron Cyclotron Resonance, it has been demonstrated that Nb films with good structural properties and RRR comparable to bulk values can be produced on metallic substrates. The controlled incoming ion energy enables a number of processes such as desorption of adsorbed species, enhanced mobility of surface atoms and sub-implantation of impinging ions, thus producing improved film structures at lower process temperatures. Particular attention is given to the nucleation conditions to create a favorable template for growing the final surface exposed to SRF fields. The influence of the deposition energy for both hetero-epitaxial and fiber growth modes on copper substrates is investigated with the characterization of the film surface, structure, superconducting properties and RF performance.
JLAB, Newport News, Virginia, USA
NCSU AIF, Raleigh, North Carolina, USA
The College of William and Mary, Williamsburg, USA
JLab, Newport News, Virginia, USA
NSU, Norfolk, USA
For the past three decades, bulk niobium has been the material of choice for SRF cavities applications. RF cavity performance is now approaching the theoretical limit for bulk niobium. For further improvement of RF cavity performance for future accelerator projects, Superconductor-Insulator-Superconductor (SIS) multilayer structures (as recently proposed by Alex Gurevich) present the theoretical prospect to reach RF performance beyond bulk Nb, using thinly layered higher-Tc superconductors with enhanced Hc1. Jefferson Lab (JLab) is pursuing this approach with the development of NbTiN and AlN based multilayer SIS structures via magnetron sputtering and High Power Impulse Magnetron Sputtering (HiPIMS). This paper presents the results on the characteristics of NbTiN and insulator films and the first RF measurements on NbTiN-based multilayer structure on thick Nb films.
The College of William and Mary, Williamsburg, USA
JLAB, Newport News, Virginia, USA
JLab, Newport News, Virginia, USA
TU, Philadelphia, USA
Due to the very shallow penetration depth of the RF fields, SRF properties are inherently a surface phenomenon involving a material thickness of less than 1 micron thus opening up the possibility of using thin film coatings to achieve a desired performance. The challenge has been to understand the dependence of the SRF properties on the detailed characteristics of real surfaces and then to employ appropriate techniques to tailor these surface properties for greatest benefit. Our aim is to achieve gradients >100 MV/m and no simple material is known to be capable of sustaining this performance. A theoretical framework has been proposed which could yield such behavior [1] and it requires creation of thin film layered structures. I will present our systematic studies on such proof-of-principle samples. Our overarching goal has been to build a basic understanding of key nano-scale film growth parameters for materials that show promise for SRF cavity multilayer coatings and to demonstrate the ability to elevate the barrier for vortex entry in such layered structures above the bulk value of Hc1 for type-II superconductors and thus to sustain higher accelerating fields.
[1]. A. Gurevich, Appl. Phys. Lett. 88, 012511 (2006).
