SRF2013 - List of Authors (Emma, P.)

Paper	Title	Page
MOP068	NGLS Linac Design	286
	R.P. Wells, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, A. Ratti LBNL, Berkeley, California, USA C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA D. Arenius JLAB, Newport News, Virginia, USA C.M. Ginsburg, T.J. Peterson Fermilab, Batavia, USA
	Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts for the cavity and cryostat design operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules, This leverages the extensive experience derived from R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given now to high loaded Q operation and microphonics control, as well as high reliability and expected up time. The work describes the design and configuration of the linac, including choice of gradient, possible modes of operation, cavity design and RF power, as well as the consequent requirements for the cryogenic system.

Paper

Title

Page

NGLS Linac Design

286

R.P. Wells, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, A. Ratti
LBNL, Berkeley, California, USA
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
D. Arenius
JLAB, Newport News, Virginia, USA
C.M. Ginsburg, T.J. Peterson
Fermilab, Batavia, USA

Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231
The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts for the cavity and cryostat design operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules, This leverages the extensive experience derived from R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given now to high loaded Q operation and microphonics control, as well as high reliability and expected up time. The work describes the design and configuration of the linac, including choice of gradient, possible modes of operation, cavity design and RF power, as well as the consequent requirements for the cryogenic system.