SRF2013 - List of Authors (Delaup, B.)

Paper	Title	Page
TUP073	Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities	611
	N.M. Jecklin, S. Calatroni, L.M.A. Ferreira, I. Mondino, A. Sublet, M. Therasse, W. Venturini Delsolaro CERN, Geneva, Switzerland B. Delaup EPFL, Lausanne, Switzerland
	The HIE-ISOLDE project is the upgrade of the existing ISOLDE facility at CERN, which is dedicated to the production of a large variety of radioactive ion beams for nuclear physics experiments. A new linac made of 20 β=10.3% and 12 β=6.3% QWR superconducting accelerating cavities at 101 MHz will be built, and in a first phase two cryomodules of 5 high-beta cavities each are scheduled to accelerate first beams in 2015. The cavities are made of a copper substrate, with a sputter-coated superconductive niobium layer, operated at 4.5 K with an accelerating field of 6 MV/m at 10W RF losses (Q0=4.5e8) In this paper we will discuss the baseline surface treatment and coating procedure which allows obtaining the required performance, as well as the steps undertaken in order to prepare series production of the required number of cavities guaranteeing their quality and functionality.

Paper

Title

Page

Niobium Coatings for the HIE-ISOLDE QWR Superconducting Accelerating Cavities

611

N.M. Jecklin, S. Calatroni, L.M.A. Ferreira, I. Mondino, A. Sublet, M. Therasse, W. Venturini Delsolaro
CERN, Geneva, Switzerland
B. Delaup
EPFL, Lausanne, Switzerland

The HIE-ISOLDE project is the upgrade of the existing ISOLDE facility at CERN, which is dedicated to the production of a large variety of radioactive ion beams for nuclear physics experiments. A new linac made of 20 β=10.3% and 12 β=6.3% QWR superconducting accelerating cavities at 101 MHz will be built, and in a first phase two cryomodules of 5 high-beta cavities each are scheduled to accelerate first beams in 2015. The cavities are made of a copper substrate, with a sputter-coated superconductive niobium layer, operated at 4.5 K with an accelerating field of 6 MV/m at 10W RF losses (Q0=4.5e8) In this paper we will discuss the baseline surface treatment and coating procedure which allows obtaining the required performance, as well as the steps undertaken in order to prepare series production of the required number of cavities guaranteeing their quality and functionality.