SRF2013 - List of Authors (Corlett, J.N.)

Paper	Title	Page
MOP068	NGLS Linac Design	286
	R.P. Wells, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, A. Ratti LBNL, Berkeley, California, USA C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA D. Arenius JLAB, Newport News, Virginia, USA C.M. Ginsburg, T.J. Peterson Fermilab, Batavia, USA
	Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts for the cavity and cryostat design operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules, This leverages the extensive experience derived from R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given now to high loaded Q operation and microphonics control, as well as high reliability and expected up time. The work describes the design and configuration of the linac, including choice of gradient, possible modes of operation, cavity design and RF power, as well as the consequent requirements for the cryogenic system.

MOP086	Integration, Commissioning and Cryogenics Performance of the ERL Cryomodule Installed on ALICE-ERL Facility at STFC Daresbury Laboratory, UK	349
	S.M. Pattalwar, R.K. Buckley, P.A. Corlett, P. Goudket, A.R. Goulden, A.J. May, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom S.A. Belomestnykh BNL, Upton, Long Island, New York, USA A. Büchner, F.G. Gabriel, P. Michel HZDR, Dresden, Germany E.P. Chojnacki, J.V. Conway, R.G. Eichhorn, G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA M.A. Cordwell, T.J. Jones, L. Ma, A.J. Moss, J. Strachan STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom J.N. Corlett, D. Li, S.M. Lidia LBNL, Berkeley, California, USA T. Kimura Stanford University, Stanford, California, USA R.E. Laxdal TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada J.K. Sekutowicz DESY, Hamburg, Germany T.J. Smith SLAC, Menlo Park, California, USA
	On successful assembly and preliminary testing of an optimised SRF cryomodule for application on ERL accelerators, which is being developed through an international collaboration the cryomodule has been installed on the 35 MeV ALICE (Accelerators and Lasers in Combined Experiments) Energy Recovery Linac (ERL) facility at STFC Daresbury Laboratory. Existing cryogenic infrastructure has a capacity to deliver approximately 120 W cooling power at 2 K, but the HOM (Higher Order Mode) absorbers, the thermal intercepts for the high power RF couplers and the radiation shield in the cryomodule are designed to be cooled (to 5 K and 80 K) with gaseous helium instead of liquid nitrogen. As a result the cryogenic infrastructure for ALICE had to be modified to meet these additional requirements. In this paper we describe our experience with the process of integration and the cryogenic commissioning, and present some initial results.

Paper

Title

Page

NGLS Linac Design

286

R.P. Wells, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, A. Ratti
LBNL, Berkeley, California, USA
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
D. Arenius
JLAB, Newport News, Virginia, USA
C.M. Ginsburg, T.J. Peterson
Fermilab, Batavia, USA

Funding: Work supported by the Director, Office of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231
The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts for the cavity and cryostat design operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules, This leverages the extensive experience derived from R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given now to high loaded Q operation and microphonics control, as well as high reliability and expected up time. The work describes the design and configuration of the linac, including choice of gradient, possible modes of operation, cavity design and RF power, as well as the consequent requirements for the cryogenic system.

MOP086

Integration, Commissioning and Cryogenics Performance of the ERL Cryomodule Installed on ALICE-ERL Facility at STFC Daresbury Laboratory, UK

349

S.M. Pattalwar, R.K. Buckley, P.A. Corlett, P. Goudket, A.R. Goulden, A.J. May, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
S.A. Belomestnykh
BNL, Upton, Long Island, New York, USA
A. Büchner, F.G. Gabriel, P. Michel
HZDR, Dresden, Germany
E.P. Chojnacki, J.V. Conway, R.G. Eichhorn, G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
M.A. Cordwell, T.J. Jones, L. Ma, A.J. Moss, J. Strachan
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
J.N. Corlett, D. Li, S.M. Lidia
LBNL, Berkeley, California, USA
T. Kimura
Stanford University, Stanford, California, USA
R.E. Laxdal
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
J.K. Sekutowicz
DESY, Hamburg, Germany
T.J. Smith
SLAC, Menlo Park, California, USA

On successful assembly and preliminary testing of an optimised SRF cryomodule for application on ERL accelerators, which is being developed through an international collaboration the cryomodule has been installed on the 35 MeV ALICE (Accelerators and Lasers in Combined Experiments) Energy Recovery Linac (ERL) facility at STFC Daresbury Laboratory. Existing cryogenic infrastructure has a capacity to deliver approximately 120 W cooling power at 2 K, but the HOM (Higher Order Mode) absorbers, the thermal intercepts for the high power RF couplers and the radiation shield in the cryomodule are designed to be cooled (to 5 K and 80 K) with gaseous helium instead of liquid nitrogen. As a result the cryogenic infrastructure for ALICE had to be modified to meet these additional requirements. In this paper we describe our experience with the process of integration and the cryogenic commissioning, and present some initial results.