SRF2013 - List of Authors (Burt, G.)

Paper	Title	Page
MOP087	Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC	353
	S.M. Pattalwar, P.A. McIntosh, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom G. Burt Cockcroft Institute, Warrington, Cheshire, United Kingdom G. Burt Lancaster University, Lancaster, United Kingdom O. Capatina CERN, Geneva, Switzerland B.D.S. Hall Cockcroft Institute, Lancaster University, Lancaster, United Kingdom T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom T.J. Peterson Fermilab, Batavia, USA
	A prototype Superconducting (RF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. A series of boundary conditions influence the design of the cryomodule prototype, arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS and LHC tunnels. As a result, the design of the helium vessel and the cryomodule has become extremely challenging. This paper assesses some of the critical cryogenic and engineering design requirements and describes an optimised cryomodule solution for the tests with SPS.

MOP001	CASCADE: a Cavity Based Dark Matter Experiment	66
	M.K. Kalliokoski, I.R. Bailey, N. Woollett Lancaster University, Lancaster, United Kingdom G. Burt, A.C. Dexter Cockcroft Institute, Lancaster University, Lancaster, United Kingdom S. Chattopadhyay Cockcroft Institute, Warrington, Cheshire, United Kingdom J.B. Dainton The University of Liverpool, Liverpool, United Kingdom P. Goudket, A.J. Moss, S.M. Pattalwar, T.T. Thakker, P.H. Williams STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	An experiment is proposed that uses a pair of RF cavities as a source and detector of hidden sector photons (HSP). HSP's are hypothetical low-mass dark matter candidates with coupling to ordinary photons. SRF cavities are favoured in this experiment as they are able to store a high number of photons for a given input power due to the high Q available. When powered, such a cavity will act as a source of HSPs, while an empty cavity will be able to capture any HSP's decaying back into RF photons. Such an experiment (CASCADE) is being developed at the Cockcroft Institute using single cell 1.3 GHz cavities previously utilised for manufacturing and BCP studies. The aims of the CASCADE project are detailed, along with the system specification.

THP036	Design of a 4 Rod Crab Cavity Cryomodule System for HL-LHC	982
	G. Burt, B.D.S. Hall Cockcroft Institute, Lancaster University, Lancaster, United Kingdom T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.J. Peterson Fermilab, Batavia, USA L.A. Wright CERN, Geneva, Switzerland
	The LHC requires compact SRF crab cavities for the HL-LHC and 3 potential solutions are under consideration. One option is to develop a 4 rod cavity utilising for quarter wave rods to maintain a dipole field. The cavity design has been developed including power and LOM/HOM couplers have been developed, as well as a conceptual design of a complete cryomodule system including ancillaries and this is presented. The cryomodule is designed to allow easy access during testing and uses a novel support system and contains the opposing beamline section to fit inside the LHC envelope.

Paper

Title

Page

Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC

353

S.M. Pattalwar, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
G. Burt
Cockcroft Institute, Warrington, Cheshire, United Kingdom
G. Burt
Lancaster University, Lancaster, United Kingdom
O. Capatina
CERN, Geneva, Switzerland
B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
T.J. Peterson
Fermilab, Batavia, USA

A prototype Superconducting (RF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. A series of boundary conditions influence the design of the cryomodule prototype, arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS and LHC tunnels. As a result, the design of the helium vessel and the cryomodule has become extremely challenging. This paper assesses some of the critical cryogenic and engineering design requirements and describes an optimised cryomodule solution for the tests with SPS.

MOP001

CASCADE: a Cavity Based Dark Matter Experiment

66

M.K. Kalliokoski, I.R. Bailey, N. Woollett
Lancaster University, Lancaster, United Kingdom
G. Burt, A.C. Dexter
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
S. Chattopadhyay
Cockcroft Institute, Warrington, Cheshire, United Kingdom
J.B. Dainton
The University of Liverpool, Liverpool, United Kingdom
P. Goudket, A.J. Moss, S.M. Pattalwar, T.T. Thakker, P.H. Williams
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

An experiment is proposed that uses a pair of RF cavities as a source and detector of hidden sector photons (HSP). HSP's are hypothetical low-mass dark matter candidates with coupling to ordinary photons. SRF cavities are favoured in this experiment as they are able to store a high number of photons for a given input power due to the high Q available. When powered, such a cavity will act as a source of HSPs, while an empty cavity will be able to capture any HSP's decaying back into RF photons. Such an experiment (CASCADE) is being developed at the Cockcroft Institute using single cell 1.3 GHz cavities previously utilised for manufacturing and BCP studies. The aims of the CASCADE project are detailed, along with the system specification.

THP036

Design of a 4 Rod Crab Cavity Cryomodule System for HL-LHC

982

G. Burt, B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.J. Peterson
Fermilab, Batavia, USA
L.A. Wright
CERN, Geneva, Switzerland

The LHC requires compact SRF crab cavities for the HL-LHC and 3 potential solutions are under consideration. One option is to develop a 4 rod cavity utilising for quarter wave rods to maintain a dipole field. The cavity design has been developed including power and LOM/HOM couplers have been developed, as well as a conceptual design of a complete cryomodule system including ancillaries and this is presented. The cryomodule is designed to allow easy access during testing and uses a novel support system and contains the opposing beamline section to fit inside the LHC envelope.