| Paper |
Title |
Page |
| TUIOC05 |
Purification of 6 GHz Cavities by Induction Heating |
419 |
| |
- A.A. Rossi, A. Battistello, M. Checchin, V. Palmieri, S. Stark, F. Stivanello, R.K. Thakur, G. Yu
INFN/LNL, Legnaro (PD), Italy
|
|
| |
We have developed an innovative technique for purification of bulk-Nb 6GHz RF cavities under ultra-high vacuum (UHV) system. The main advantages of 6 GHz bulk-Nb cavities are saving cost, materials and time to collect statistics of surface treatments and RF test. Cavities are RF tested before and after high temperature treatment under UHV conditions. Induction heating method is used to anneal the cavity at temperatures higher than 2000°C and close to the melting point of Nb for less than a minute while few seconds at maximum temperature. Before RF test and UHV annealing, the surface treatment processes like tumbling, chemical, electro-chemical (such as BCP and EP), ultrasonic cleaning and high pressure rinsing (HPR) have been employed. This kind of Nb 6 GHz cavity purification allow to reduce hydrogen, oxygen and other elemental impurities content, which effects on cavity Q-factor degradation, by a rapid annealing over 2000°C and a subsequent rapid reduction at room temperature.
|
|
|
Slides TUIOC05 [42.171 MB]
|
|
| |