PCaPAC2014 - List of Keywords (vacuum)

Paper	Title	Other Keywords	Page
WPO011	Vacuum Interlock Control System for EMBL Beamlines at PETRA III	controls, PLC, ion, interface	57
	A. Kolozhvari, S. Fiedler, U. Ristau EMBL, Hamburg, Germany
	A vacuum interlock system is developed for EMBL beamlines at PETRA-III facility. It runs on Beckhoff PLC and protects instruments by closing corresponding vacuum valves and beam shutters when pressure exceeds a safety threshold. Communication with PETRA-III interlock system is implemented via digital I/O connections. The system is integrated in the EMBL beamlines control via TINE and supplies data to archive and alarm subsystems. A LabVIEW client, operating in TINE environment, provides graphical user interface for the vacuum interlock system control and data representation.

WPO030	Vacuum Pumping Group Controls Based on PLC	controls, PLC, status, software	105
	S. Blanchard, F. Antoniotti, F. Bellorini, J-P. Boivin, J. Gama, P. Gomes, H.F. Pereira, G. Pigny, B. Rio, H. Vestergard CERN, Geneva, Switzerland L. Kopylov, S. Merker, M.S. Mikheev IHEP, Moscow Region, Russia
	In CERN accelerators, high vacuum is needed in the beam pipes and for thermal isolation of cryogenic equipment. The first element in the chain of vacuum production is the pumping group. It is composed of a primary pump, a turbo-molecular pump and a few isolation and intermediate valves; as optional devices we can also find: vacuum gauges, venting valves and leak detection valves. At CERN accelerators, the pumping groups controllers may be found in several hardware configurations, depending on the environment and on the vacuum system used; all of them are based on PLCs and communicate over a field bus; they are controlled by the same flexible and portable software. They are remotely accessed through a SCADA application and can be locally controlled by the same mobile touch-panel. More than 250 pumping groups are permanently installed in the Large Hardron Collider, Linacs or North Area Experiments.
	Poster WPO030 [1.849 MB]

Paper

Title

Other Keywords

Page

WPO011

Vacuum Interlock Control System for EMBL Beamlines at PETRA III

controls, PLC, ion, interface

57

A. Kolozhvari, S. Fiedler, U. Ristau
EMBL, Hamburg, Germany

A vacuum interlock system is developed for EMBL beamlines at PETRA-III facility. It runs on Beckhoff PLC and protects instruments by closing corresponding vacuum valves and beam shutters when pressure exceeds a safety threshold. Communication with PETRA-III interlock system is implemented via digital I/O connections. The system is integrated in the EMBL beamlines control via TINE and supplies data to archive and alarm subsystems. A LabVIEW client, operating in TINE environment, provides graphical user interface for the vacuum interlock system control and data representation.

WPO030

Vacuum Pumping Group Controls Based on PLC

controls, PLC, status, software

105

S. Blanchard, F. Antoniotti, F. Bellorini, J-P. Boivin, J. Gama, P. Gomes, H.F. Pereira, G. Pigny, B. Rio, H. Vestergard
CERN, Geneva, Switzerland
L. Kopylov, S. Merker, M.S. Mikheev
IHEP, Moscow Region, Russia

In CERN accelerators, high vacuum is needed in the beam pipes and for thermal isolation of cryogenic equipment. The first element in the chain of vacuum production is the pumping group. It is composed of a primary pump, a turbo-molecular pump and a few isolation and intermediate valves; as optional devices we can also find: vacuum gauges, venting valves and leak detection valves. At CERN accelerators, the pumping groups controllers may be found in several hardware configurations, depending on the environment and on the vacuum system used; all of them are based on PLCs and communicate over a field bus; they are controlled by the same flexible and portable software. They are remotely accessed through a SCADA application and can be locally controlled by the same mobile touch-panel. More than 250 pumping groups are permanently installed in the Large Hardron Collider, Linacs or North Area Experiments.

Poster WPO030 [1.849 MB]