PCaPAC2014 - List of Keywords (LLRF)

Paper	Title	Other Keywords	Page
WCO101	Drivers and Software for MicroTCA.4	controls, interface, Linux, hardware	1
	M. Killenberg, L.M. Petrosyan, Ch. Schmidt DESY, Hamburg, Germany T. Kozak, P. Prędki, J. Wychowaniak TUL-DMCS, Łódź, Poland S. Marsching Aquenos GmbH, Baden-Baden, Germany M. Mehle, T. Sunik, K. Žagar Cosylab, Ljubljana, Slovenia A. Piotrowski FastLogic Sp. z o.o., Łódź, Poland
	The MicroTCA.4 crate standard provides a powerful electronic platform for digital and analogue signal processing. Besides excellent hardware modularity, it is the software reliability and flexibility as well as the easy integration into existing software infrastructures that will drive the widespread adoption of the new standard. The DESY MicroTCA.4 User Tool Kit (MTCA4U) comprises three main components: A Linux device driver, a C++ API for accessing the MicroTCA.4 devices and a control system interface layer. The main focus of the tool kit is flexibility to enable fast development. The universal, expandable PCIexpress driver and a register mapping library allow out of the box operation of all MicroTCA.4 devices which carry firmware developed with the DESY FPGA board support package. The control system adapter provides callback functions to decouple the application code from the middleware layer. Like this the same business logic can be used at different facilities without further modification.
	Slides WCO101 [0.760 MB]

WCO204	A Prototype Data Acquisition System of Abnormal RF Waveform at SACLA	database, operation, controls, GUI	19
	M. Ishii, M. Kago JASRI/SPring-8, Hyogo-ken, Japan T. Fukui RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan T. Maruyama RIKEN/SPring-8, Hyogo, Japan T. Ohshima RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan M. Yoshioka SES, Hyogo-pref., Japan
	At SACLA, an event-synchronized data acquisition system had been installed. The system collects shot-by-shot data, such as representative point data of the phase and amplitude of the rf cavity pickup signals, in synchronization with the beam operation cycle. In addition, rf waveform data is collected every 10 minutes. However a collection with several minutes cycle couldn’t catch an abnormal rf waveform that suddenly occurs. To overcome this problem, we have developed a system to capture waveform when some abnormal event occurs. The system consists of the VMEbus systems, a DAQ server, and a NoSQL database system, Cassandra. The VMEbus system detects an abnormal rf waveform, collects all related waveforms with same shot and sends to a DAQ server. All waveforms are stored Cassandra via the DAQ server. The DAQ server keeps data for 2 seconds from current time on memory to complement Cassandra’s eventual consistency model. We constructed a prototype DAQ system with a minimum configuration and checked its performance. We report the requirements and structure of the DAQ system and the test results in this paper.
	Slides WCO204 [1.426 MB]

Paper

Title

Other Keywords

Page

WCO101

Drivers and Software for MicroTCA.4

controls, interface, Linux, hardware

1

M. Killenberg, L.M. Petrosyan, Ch. Schmidt
DESY, Hamburg, Germany
T. Kozak, P. Prędki, J. Wychowaniak
TUL-DMCS, Łódź, Poland
S. Marsching
Aquenos GmbH, Baden-Baden, Germany
M. Mehle, T. Sunik, K. Žagar
Cosylab, Ljubljana, Slovenia
A. Piotrowski
FastLogic Sp. z o.o., Łódź, Poland

The MicroTCA.4 crate standard provides a powerful electronic platform for digital and analogue signal processing. Besides excellent hardware modularity, it is the software reliability and flexibility as well as the easy integration into existing software infrastructures that will drive the widespread adoption of the new standard. The DESY MicroTCA.4 User Tool Kit (MTCA4U) comprises three main components: A Linux device driver, a C++ API for accessing the MicroTCA.4 devices and a control system interface layer. The main focus of the tool kit is flexibility to enable fast development. The universal, expandable PCIexpress driver and a register mapping library allow out of the box operation of all MicroTCA.4 devices which carry firmware developed with the DESY FPGA board support package. The control system adapter provides callback functions to decouple the application code from the middleware layer. Like this the same business logic can be used at different facilities without further modification.

Slides WCO101 [0.760 MB]

WCO204

A Prototype Data Acquisition System of Abnormal RF Waveform at SACLA

database, operation, controls, GUI

19

M. Ishii, M. Kago
JASRI/SPring-8, Hyogo-ken, Japan
T. Fukui
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
T. Maruyama
RIKEN/SPring-8, Hyogo, Japan
T. Ohshima
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
M. Yoshioka
SES, Hyogo-pref., Japan

At SACLA, an event-synchronized data acquisition system had been installed. The system collects shot-by-shot data, such as representative point data of the phase and amplitude of the rf cavity pickup signals, in synchronization with the beam operation cycle. In addition, rf waveform data is collected every 10 minutes. However a collection with several minutes cycle couldn’t catch an abnormal rf waveform that suddenly occurs. To overcome this problem, we have developed a system to capture waveform when some abnormal event occurs. The system consists of the VMEbus systems, a DAQ server, and a NoSQL database system, Cassandra. The VMEbus system detects an abnormal rf waveform, collects all related waveforms with same shot and sends to a DAQ server. All waveforms are stored Cassandra via the DAQ server. The DAQ server keeps data for 2 seconds from current time on memory to complement Cassandra’s eventual consistency model. We constructed a prototype DAQ system with a minimum configuration and checked its performance. We report the requirements and structure of the DAQ system and the test results in this paper.

Slides WCO204 [1.426 MB]