PAC2013 - List of Authors (Morgan, G.)

Paper

Title

Page

Integration Between the FRIB Linac Mechanical CAD Model Geometry and the Accelerator Physics Lattice Database

679

M.J. Johnson
NSCL, East Lansing, Michigan, USA
N.K. Bultman, I. Grender, M. Leitner, G. Morgan, O. Yair, Q. Zhao
FRIB, East Lansing, Michigan, USA

Funding: Work supported by US DOE Cooperative Agreement DE-SC0000661.
This paper will summarize the systems engineering techniques utilized to translate the FRIB accelerator physics lattice file to actual three dimensional CAD geometry for linac components. An automated approach of using the accelerator physics lattice database used for optics and particle simulation has been implemented to generate data points used to position the technical 3-dimensional CAD geometry. This coordinated method ensures consistency between the technical and scientific design domains throughout the project design phases. The FRIB configuration management used to control lattice and CAD model revisions is also discussed. In addition, the paper discusses fiducialization plans and tolerance stack up analysis to meet positional requirements for FRIB cryomodules, diagnostics, and the beam delivery magnet systems.

WEOAB1

Status of the FRIB Front End

734

E. Pozdeyev, N.K. Bultman, G. Machicoane, G. Morgan, X. Rao, Q. Zhao
FRIB, East Lansing, Michigan, USA

Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661
The FRIB Front End will provide beams of stable ions with a mass up to uranium at a beam energy of 500 keV/u and intensity required to achieve a power of 400 kW on the fragmentation target. In this paper, we describe progress with the design and construction of the Front End and its systems.

Slides WEOAB1 [5.861 MB]

Paper	Title	Page
TUPSM20	Integration Between the FRIB Linac Mechanical CAD Model Geometry and the Accelerator Physics Lattice Database	679
	M.J. Johnson NSCL, East Lansing, Michigan, USA N.K. Bultman, I. Grender, M. Leitner, G. Morgan, O. Yair, Q. Zhao FRIB, East Lansing, Michigan, USA
	Funding: Work supported by US DOE Cooperative Agreement DE-SC0000661. This paper will summarize the systems engineering techniques utilized to translate the FRIB accelerator physics lattice file to actual three dimensional CAD geometry for linac components. An automated approach of using the accelerator physics lattice database used for optics and particle simulation has been implemented to generate data points used to position the technical 3-dimensional CAD geometry. This coordinated method ensures consistency between the technical and scientific design domains throughout the project design phases. The FRIB configuration management used to control lattice and CAD model revisions is also discussed. In addition, the paper discusses fiducialization plans and tolerance stack up analysis to meet positional requirements for FRIB cryomodules, diagnostics, and the beam delivery magnet systems.

WEOAB1	Status of the FRIB Front End	734
	E. Pozdeyev, N.K. Bultman, G. Machicoane, G. Morgan, X. Rao, Q. Zhao FRIB, East Lansing, Michigan, USA
	Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661 The FRIB Front End will provide beams of stable ions with a mass up to uranium at a beam energy of 500 keV/u and intensity required to achieve a power of 400 kW on the fragmentation target. In this paper, we describe progress with the design and construction of the Front End and its systems.
	Slides WEOAB1 [5.861 MB]