A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Zhuravlev, A.N.

Paper Title Page
WE3PBI02 Study of Beam Dynamics during the Crossing of the Third-Order Resonance at VEPP-4M 1894
 
  • P.A. Piminov, S.A. Glukhov, E.B. Levichev, O.I. Meshkov, S.A. Nikitin, I.B. Nikolaev, A.N. Zhuravlev
    BINP SB RAS, Novosibirsk
 
 

The influence of resonances on the beam dynamics in storage rings is of substantial interest to accelerator physics. For example, a fast crossing of resonances occurs in the damping rings of future linear colliders during the beam damping (due to the incoherent shift) can result in a loss of particles. We have studied experimentally the crossing of resonances of different power near the working point of the VEPP-4M storage ring. Observation of the beam sizes and particle losses was performed with a single-turn time resolution. Comparison with the numerical simulation has been made and will be presented alongside the experimental results.

 

slides icon

Slides

 
TH6REP029 Accelerator Physics Activity at the VEPP-4M Collider 4012
 
  • P.A. Piminov, V.E. Blinov, A.V. Bogomyagkov, S.E. Karnaev, G.V. Karpov, V.A. Kiselev, S.A. Krutikhin, G.Y. Kurkin, E.B. Levichev, O.I. Meshkov, S.V. Motygin, S.A. Nikitin, I.B. Nikolaev, V.N. Osipov, V.M. Petrov, E. Rotov, E. Shubin, V.V. Smaluk, G.M. Tumaikin, A.N. Zhuravlev
    BINP SB RAS, Novosibirsk
 
 

The VEPP-4M electron-positron collider is now operating with the KEDR detector for high-energy physics experiments in the 1.5−2.0 GeV beam energy range. Parallel with these experiments, the VEPP-4M scientific team carries out a number of accelerator physics investigations. A new registration system for the Touschek polarimeter has been put into operation. A new NMR-based system for suppression of the guide field ripples has been developed. The counting rate of the Touschek particles has been measured as a function of the beam energy in the range from 1.85 to 4 GeV. The measurement results can be claimed at the future super B and C-Tau factories. For simultaneous measurement of the transverse beam position and inclination angle an X-ray multi-pinhole camera has been designed, manufactured and installed at the VEPP-4M. To suppress the longitudinal instability caused by high-order modes of the RF cavities, a feedback system has been developed.