• E.R. Arab
  PBPL, Los Angeles
• G. Travish, N. Vartanian, J. Xu
  UCLA, Los Angeles, California
• R.B. Yoder
  Manhattanville College, Purchase, NY

The millimeter-scaleμAccelerator Platform (MAP)–essentially a “particle accelerator on a chip”–will ultimately allow for revolutionary medical and industrial applications due to its manageable size and reproducibility. The MAP consists of an electron source and an all-dielectric, laser powered, particle accelerator. The dielectric structure has two slab-symmetric reflecting mirrors with a vacuum gap between them. A periodic coupling mechanism allows laser power to enter transversely through one mirror. This mechanism is analogous to the slots of an optical diffraction grating, with coupling period and vacuum gap equal to the wavelength of the laser (800nm in this study). Work to date has included designing, fabricating and testing a prototype relativistic structure using a patterned gold layer. To go further, we have studied the fabrication techniques and electromagnetic designs of an all-dielectric (non-metallic) structure. Fabrication of the final structure is modeled after Vertical-Cavity Surface-Emitting Lasers (VCSEL) and Distributed Bragg Reflector (DBR) techniques. Preliminary numerical studies of the sub-relativistic structure are also presented.

• S. Boucher, P. Frigola
  RadiaBeam, Marina del Rey
• E.R. Arab, G. Travish, N. Vartanian
  UCLA, Los Angeles, California
• R.B. Yoder
  Manhattanville College, Purchase, NY

Funding: This project is supported by DOE SBIR Grant DE-FG02-08ER85038.

Laser-powered dielectric accelerating structures, which have attracted attention in recent years, trade fabrication challenges and extremely small beam apertures for the promise of high gradients and new bunch formats. The slab-symmetric, periodically-coupledμAccelerator Platform (MAP) is one such dielectric accelerator, and has been under development through a RadiaBeam-UCLA collaboration for several years. Intended applications of the structure include the production of radiation for medical treatments, imaging, and industrial uses. Prototype MAP structures are now being fabricated, and a program has been undertaken to test this device using externally injected electron beams. Plans are underway to install structures in the E163 facility at SLAC. In this paper we describe the testing methods, diagnostics and expectations. Progress and results to date are also presented.