Paper | Title | Page |
---|---|---|
MO6RFP077 | Status of the LBNL Normal-Conducting CW VHF Photo-Injector | 551 |
|
||
Funding: This work was supported by the Director of the Office of Science of the US Department of Energy under Contract no. DEAC02-05CH11231 A high-brightness high-repetition rate photo-injector based on a normal conducting 187 MHz RF cavity design capable of CW operation is under construction at the Lawrence Berkeley National Laboratory. A cathode field of ~20 MV/m accelerates electron bunches to 750 keV with peak current, energy spread and transverse emittance suitable for FEL and ERL applications. A vacuum load-lock mechanism is included and a 10 picoTorr range vacuum capability allows most types of photocathodes to operate at a MHz repetition rate with present laser technology. The status of the project is presented. |
||
TU5RFP039 | Using Synchrobetatron Resonances to Generate a Crabbed Beam at the ALS | 1180 |
|
||
Funding: Supported by DOE BES contract DE-AC03-76SF00098. Several years ago experiments at the APS demonstrated the possibility of creating crabbed beam through vertically kicking the beam and letting it oscillate for a half of a synchrotron period. Such a crabbed beam would allow the possibility of creating a few ps xrays. At the ALS we have repeated these experiments. In this paper we will present the results obtained and compare them to theoretical predictions. |
||
TU5RFP042 | Commissioning and User Operation of the ALS in Top-Off Mode | 1183 |
|
||
Funding: This work was supported by the Director, Office of Science, U. S. Department of Energy under Contract No. DE-AC02-05CH11231. The upgrade of the Advanced Light Source to enable top-off operation has been ongoing for the last four years. Activities over the last year have centered around radiation safety aspects, culminating in a systematic proof that top-off operation is equally safe as decaying beam operation, followed by commissioning and full user operations. Top-off operation at the ALS provides a very large increase in time-averaged brightness to ALS users (by about a factor of 10) as well as improvements in beam stability. The presentation will provide an overview of the radiation safety rationale, commissioning results, as well as experience in user operations. |
||
TH5PFP071 | Multiobjective Light Source Lattice Optimization | 3365 |
|
||
Funding: Work supported by the Director, Office of Science, U. S. Department of Energy under Contract No. DE-AC02-05CH11231. Multiobjective optimization has been used in many fields including accelerator related projects. Here we use it as a powerful tool for lattice design and optimization, which includes betatron functions, brightness. |