CERN, Geneva
BNL, Upton, Long Island, New York
EPFL, Lausanne
The grazing function g is introduced – a synchrobetatron optical quantity that parametrizes the rate of change of total angle with respect to synchrotron amplitude for particles grazing a collimator or aperture. The grazing function is particularly important for crystal collimators, which have limited acceptance angles. The implications for RHIC, SPS, Tevatron and LHC crystal implementations are discussed. An analytic approximation is derived for the maximum value of g in a matched FODO cell, and is shown to be in good agreement with a realistic numerical example. The grazing function scales linearly with FODO cell bend angle, but to is independent of FODO cell length.
CERN, Geneva
EPFL, Lausanne
IHEP Protvino, Protvino, Moscow Region
The UA9 experiment at the SPS aims at testing bent crystals for usage as collimators with high energy stored proton and heavy ion beams. The experiments will try to establish crystal-based cleaning efficiency with slowly diffusing beam halo. One method for evaluating efficiency relies on Roman Pots and is described elsewhere. An alternative method relies on observing the beam loss signals around the ring. Comparisons of losses escaping from standard collimators and bent crystals will allow determination of cleaning efficiency, equivalent to the definition used for the LHC collimation design. This alternative method is described and simulations with LHC collimation tracking tools for UA9 are discussed. The predicted beam losses along the SPS ring are presented for different orientations and amorphous layer thicknesses of the crystal. The effect of different diffusion speeds for the beam are discussed.
CERN, Geneva
EPFL, Lausanne
IHEP Protvino, Protvino, Moscow Region
Bent crystals are promised to provide a path towards significant improvement of cleaning efficiency for high power collimation systems. In this paper a possible implementation of a crystal-enhanced collimation system is evaluated for the LHC. Simulation studies were performed with the same state-of the art tracking codes as used for the design of the conventional LHC collimation system. The numerical models are described and predictions for the local and global cleaning efficiency with a crystal-based LHC collimation system are presented. Open issues and further work towards a crystal collimation design for the LHC are discussed.
SLAC, Menlo Park, California
CERN, Geneva
Fermilab, Batavia
Funding: Work supported in part by the U.S. Department of Energy contract DE-AC02-76SF00515
It has been proposed to use a hollow electron lens with the LHC beam collimation system*. The hollow electron beam would be used as a beam scraper and positioned at a closer σ than the primary collimators to increase the halo particle diffusion rate striking the primaries. In this paper we use multi-turn beam tracking simulations to analyze the effectiveness of such a lens when integrated into the LHC collimation system.
*Shiltsez, V. et al. "LHC Particle Collimation by Hallow Electron Beams," Proceedings EPAC08, MOPC098 (2008)
Fermilab, Batavia
CERN, Geneva
IHEP Protvino, Protvino, Moscow Region
INFN-Ferrara, Ferrara
PNPI, Gatchina, Leningrad District
BNL, Upton, Long Island, New York
Università dell'Insubria & INFN Milano Bicocca, Como
Enrico Fermi Institute, University of Chicago, Chicago, Illinois
Funding: Work supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy.
Bent-crystal channeling is a technique with a potential to increase the beam-halo collimation efficiency at high-energy colliders. First measurements at the Tevatron in 2005 have shown that using a 5-mm silicon crystal to deflect the proton beam halo onto a secondary collimator improves the system performance by reducing the machine impedance, beam losses in the collider detectors and irradiation of the superconducting magnets, all in agreement with simulations. Recent results, obtained with substantially improved goniometer and enhanced beam diagnostics, are reported showing channeling collimation of the ~1-TeV circulating proton beam halo at the Tevatron collider. Comprehensive results of computer modeling are presented which allow further developments of the T-980 experiment towards a robust system compatible with requirements to high-efficient collimation at the Tevatron and LHC hadron colliders.
CERN, Geneva
Collimation and halo cleaning for the LHC beams are performed separately for betatron and momentum losses, requiring two dedicated insertions for collimation. Betatron cleaning is performed in IR7 while momentum cleaning is performed in IR3. A study has been performed to evaluate the performance reach for a combined betatron and momentum cleaning system in IR3. The results are presented.
CERN, Geneva
EPFL, Lausanne
IHEP Protvino, Protvino, Moscow Region
The UA9 experiment at the SPS aims at testing bent crystals for usage as collimators with high energy stored proton and heavy ion beams. The experiments will try to establish crystal-based cleaning efficiency with slowly diffusing beam halo. One method for evaluating efficiency relies on Roman Pots and is described elsewhere. An alternative method relies on observing the beam loss signals around the ring. Comparisons of losses escaping from standard collimators and bent crystals will allow determination of cleaning efficiency, equivalent to the definition used for the LHC collimation design. This alternative method is described and simulations with LHC collimation tracking tools for UA9 are discussed. The predicted beam losses along the SPS ring are presented for different orientations and amorphous layer thicknesses of the crystal. The effect of different diffusion speeds for the beam are discussed.
CERN, Geneva
EPFL, Lausanne
IHEP Protvino, Protvino, Moscow Region
Bent crystals are promised to provide a path towards significant improvement of cleaning efficiency for high power collimation systems. In this paper a possible implementation of a crystal-enhanced collimation system is evaluated for the LHC. Simulation studies were performed with the same state-of the art tracking codes as used for the design of the conventional LHC collimation system. The numerical models are described and predictions for the local and global cleaning efficiency with a crystal-based LHC collimation system are presented. Open issues and further work towards a crystal collimation design for the LHC are discussed.