A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Pogge, J.

Paper Title Page
TH5RFP099 The Laser Emittance Scanner for 1 GeV H- Beam 3684
 
  • D. Jeon, A.V. Aleksandrov, S. Assadi, W.P. Grice, Y. Liu, A.A. Menshov, J. Pogge, A. Webster
    ORNL, Oak Ridge, Tennessee
  • I. Nesterenko
    BINP SB RAS, Novosibirsk
 
 

Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.


A transverse phase space emittance scanner is proposed and under development for the 1-GeV H- SNS linac, using a laser beam as a slit. For a 1 GeV H- beam, it is difficult to build a slit because the stopping distance is more than 50 cm in copper. We propose to use a laser beam as an effective slit by stripping off the outer electron of the H- (making it neutral) upstream of a bend magnet and measuring the stripped component downstream of the bend magnet. The design and modeling of the system will be discussed. We are expecting to make a preliminary measurement in 2009.

 
FR5REP038 SNS BLM System Evolution: Detectors, Electronics, and Software 4853
 
  • A.P. Zhukov, S. Assadi, R. Dickson, J. Pogge
    ORNL, Oak Ridge, Tennessee
  • V. Gaidash
    RAS/INR, Moscow
 
 

Funding: ORNL/SNS is managed by UT-Battelle, LLC, for the U.S. Department of Energy under contract DE-AC05-00OR22725.


SNS is a high intensity hadron beam facility; so the Beam Loss Monitor (BLM) system is a crucial part of Machine Protection System and an important tool for beam tuning. The paper presents the current status of installed detectors and experimental data obtained during SNS operations. We compare several different types of BLMs and show advantages and disadvantages of each type. The electronic parts obsolescence became a real issue since the original electronics was designed about 10 years ago. The first test of our next generation BLM system is expected to be done by summer 2009. The new system will contribute to significant noise reduction and will follow a modular concept of Smart Device to achieve a higher degree of reliability and maintainability.