BNL, Upton, Long Island, New York
CERN, Geneva
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy and the US LHC Accelerator Research Program (LARP).
In the Relativistic Heavy Ion Collider (RHIC) beams collide in the two interaction points IP6 and IP8. An increase of the bunch intensity above 2·1011 in polarized proton operation appears difficult due to the large beam-beam tune spread generated by the two collisions. A low energy electron beam or electron lens has been proposed to mitigate the head on beam-beam effect. In RHIC such a device could be located near IP10. We summarize multi-particle weak-strong beam-beam simulations of head-on beam-beam compensation with an electron lens. The proton beam's lifetime and emittance are calculated and compared for situations with and without an electron lens. Parameters such as the proton bunch intensity, the electron beam intensity and the betatron phase advances between IP8 and IP10 are scanned in the simulations.
BNL, Upton, Long Island, New York
Fermilab, Batavia
Funding: Work supported by U.S. DOE under contract No DE-AC02-98CH1-886
Long-range and head-on beam-beam effects are expected to limit the LHC performance with design parameters. To mitigate long-range effects current carrying wires parallel to the beam were proposed. Two such wires are installed in RHIC where they allow studying the effect of strong long-range beam-beam effects, as well as the compensation of a single long-range interaction. The tests provide benchmark data for simulations and analytical treatments. To reduce the head-on beam-beam effect electron lenses were proposed for both the LHC and RHIC. We present the experimental long-range beam-beam program and report on head-on compensations studies at RHIC, which are primarily based on simulations.
PSI, Villigen
CANDLE, Yerevan
Recently tentative top-up operation of the Swiss Light Source (SLS) storage ring at low momentum compaction factor has been started. We will present an analysis of the longitudinal dynamics and simulations of the injection process, and explain our method to ensure closed orbit stability. First experimental results will be shown and compared to the model predictions.