BNL, Upton, Long Island, New York
CERN, Geneva
Lancaster University, Lancaster
KEK, Ibaraki
SLAC, Menlo Park, California
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
LBNL, Berkeley, California
Fermilab, Batavia
Funding: This work was partially performed under the auspices of the US DOE and the European Community-Research Infrastructure, FP6 programme (CARE, contract number RII3-CT-2003-506395)}
The LHC crab cavity program is advancing rapidly towards a first prototype which is anticipated to be tested during the early stages of the LHC phase I upgrade and commissioning. Some aspects related to crab optics, collimation, aperture constraints, impedances, noise effects, beam transparency and machine protection critical for a safe and robust operation of LHC beams with crab cavities are addressed here.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
EMMA is a prototype non-scaling FFAG that requires a demanding RF system. Production for the final RF system is due for completion in Spring 09 and testing of the combined hardware has taken place. This paper describes the high power verification tests of the IOT transmitter, waveguide distribution, RF cavity and LLRF control system.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
ALICE (Accelerators and Lasers in Combined Experiments) incorporates two super-conducting radio frequency (SCRF) cryomodules each with two identical 9-cell cavities that are powered by 5 inductive output tubes (IOTs) from 3 different commercial suppliers. During the commissioning of the ALICE rf system numerous problems were encountered with the operation of the high voltage power supply and the auxiliary power supplies, which had to be resolved before the beam commissioning of the accelerator could commence. The issues encountered and measures taken to improve the operation of the rf system are described within this paper.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
EMMA (Electron Model for Many Applications) is a non-scaling Fixed Field Accelerating Gradient (NS-FFAG) accelerator presently in the process of being built at Daresbury Laboratory as a proof of principle demonstrator for proton/carbon therapy application. Its aim is to take an injected beam from ALICE (Accelerators and Lasers in Combined Experiments) at 10MeV and accelerate it to 20MeV, so that the characteristics of NS-FFAGs can be studied. The beam is to be accelerated by 19 identical 1.3GHz RF cavities, which each need to provide the same accelerating voltage to the beam. The initial design stage of the RF system design has been completed, utilising three commercial suppliers of the major RF sub-system components.
OXFORDphysics, Oxford, Oxon
Imperial College of Science and Technology, Department of Physics, London
UMAN, Manchester
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
Brunel University, Middlesex
STFC/RAL/ISIS, Chilton, Didcot, Oxon
STFC/RAL/ASTeC, Chilton, Didcot, Oxon
JAI, Oxford
Cockcroft Institute, Lancaster University, Lancaster
Manchester University, Manchester
Gray Cancer Institute, Northwood, Middlesex
Funding: EP/E032869/1
AMELA (Particle Accelerator for MEdicaL Applications) is a newly developed fixed field accelerator, which has capability for rapid beam acceleration, which is interesting for practical applications such as charged particle therapy. PAMELA aims to design a particle therapy facility using Non-Scaling FFAG technology, with a target beam repetition rate of 1kHz, which is far beyond that of conventional synchrotron. To realize the repetition rate, the key component is rf acceleration system. The combination of a high field gradient and a high duty factor is a significant challenge. In this paper, options for the system and the status of their development are presented.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
CLASSE, Ithaca, New York
FZD, Dresden
STFC/DL, Daresbury, Warrington, Cheshire
LBNL, Berkeley, California
Stanford University, Stanford, California
DESY, Hamburg
STFC/DL/SRD, Daresbury, Warrington, Cheshire
The collaborative development of an optimised cavity/cryomodule solution for application on ERL facilities, has now progressed to final assembly and testing of the cavity string components and their subsequent cryomodule integration. This paper outlines the verification of the various cryomodule sub-components and details the processes utilised for final cavity string integration. The paper also describes the modifications needed to facilitate this new cryomodule installation and ultimate operation on the ALICE facility at Daresbury Laboratory.
Diamond, Oxfordshire
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
STFC/DL, Daresbury, Warrington, Cheshire
STFC/RAL, Chilton, Didcot, Oxon
Imperial College of Science and Technology, Department of Physics, London
USTRAT/SUPA, Glasgow
UMAN, Manchester
The New Light Source (NLS) project was launched in April 2008 by the UK Science and Technology Facilities Council (STFC) to consider the scientific case and develop a conceptual design for a possible next generation light source based on a combination of advanced conventional laser and free-electron laser sources. Following a series of workshops and a period of scientific consultation, the science case was approved in October 2008 and the go-ahead given to continue the project to the design stage. In November the decision was taken that the facility will be based on cw superconducting technology in order to provide the best match to the scientific objectives. In this paper we present the source requirements, both for baseline operation and with possible upgrades, and the current status of the design of the accelerator driver and free-electron laser sources to meet those requirements.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
STFC/DL, Daresbury, Warrington, Cheshire
UMAN, Manchester
FZD, Dresden
DESY, Hamburg
JLAB, Newport News, Virginia
KEK, Ibaraki
The University of Liverpool, Liverpool
STFC/DL/SRD, Daresbury, Warrington, Cheshire
STFC/RAL, Chilton, Didcot, Oxon
ACCEL, Bergisch Gladbach
ALICE (Accelerators and Lasers in Combined Experiments) is a 35 MeV energy recovery linac based light source. ALICE is being developed as an experimental test-bed for a broad suite of science and technology activities that make use of electron acceleration and ultra-short pulse laser techniques. This paper reports the progress made in accelerator commissioning and includes the results of measurement made on the commissioning beam. The steps taken to prepare the beam for short pulse operation as a driver for a Compton Back Scattered source and in preparation for the commissioning of the free electron laser are reported.
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
Cockcroft Institute, Lancaster University, Lancaster
The ILC crab cavities require very tight phase control in order to operate within the ILC parameters. In order to verify that the phase control system met the design tolerances, two single-cell niobium 3.9GHz superconducting dipole-mode cavities were tested in a liquid helium cryostat. The preparation of the cavities, design of the testing apparatus and performance of the phase control system are described in this paper.
JAI, Oxford
Imperial College of Science and Technology, Department of Physics, London
UMAN, Manchester
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
STFC/DL, Daresbury, Warrington, Cheshire
STFC/RAL, Chilton, Didcot, Oxon
Brunel University, Middlesex
GIROB, Oxford
Fermilab, Batavia
Gray Institute for Radiation Oncology and Biology, Oxford
STFC/RAL/ASTeC, Chilton, Didcot, Oxon
Cockcroft Institute, Lancaster University, Lancaster
Funding: EPSRC EP/E032869/1
The PAMELA (Particle Accelerator for MEdicaL Applications) project is to design an accelerator for proton and light ion therapy using non-scaling Fixed Field Alternating Gradient (FFAG) accelerators, as part of the CONFORM project, which is also constructing the EMMA electron model of a non-scaling FFAG at Daresbury. This paper presents an overview of the PAMELA design, and a discussion of the design goals and the principles used to arrive at a preliminary specification of the accelerator.