A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Kang, Y.W.

Paper Title Page
TU5PFP091 Status of the Spallation Neutron Source Radio Frequency Systems 1045
 
  • T.W. Hardek, M.T. Crofford, Y.W. Kang, S.W. Lee, M.P. McCarthy, M.F. Piller, A.V. Vassioutchenko
    ORNL, Oak Ridge, Tennessee
  • M.E. Middendorf
    ORNL RAD, Oak Ridge, Tennessee
 
 

Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.


The SNS has been operational and delivering beam to the target for 3 years. Over this time period we have increased the beam power delivered to the target to 700 kW, 50% of the design goal. The RF Group has acquired a fair amount of experience in the operation and maintenance of our RF systems during the power ramp up process. This paper reviews the design and layout of the various SNS RF systems, documents the present state and performance of the systems and covers, in a broad sense, issues raised during operation and improvements we have undertaken as well as future RF system requirements.

 
WE2PBC03 Investigation of Beam - RF Interactions in Twisted Waveguide Accelerating Structures Using Beam Tracking Codes 1855
 
  • J.A. Holmes, J. Galambos, Y.W. Kang, Y. Zhang
    ORNL, Oak Ridge, Tennessee
  • M.H. Awida
    University of Tennessee, Knoxville, Tennessee
  • J.L. Wilson
    MIT Lincoln Laboratory, Boston MA
 
 

Funding: ORNL/SNS is managed by UT-Battelle, LLC, for the U.S. Department of Energy under contract DE-AC05-00OR22725.


Investigations of the rf properties of certain twisted waveguide structures show that they support favorable accelerating fields. This makes them potential candidates for accelerating cavities. Using the particle tracking code, ORBIT, We examine the beam - rf interaction in the twisted cavity structures to understand their beam transport and acceleration properties. The results will show the distinctive properties of these new structures for particle transport and acceleration, which have not been previously analyzed.

 

slides icon

Slides

 
WE5PFP007 Building Twisted Waveguide Accelerating Structures 1997
 
  • M.H. Awida
    University of Tennessee, Knoxville, Tennessee
  • M.H. Awida
    ORNL RAD, Oak Ridge, Tennessee
  • Y.W. Kang, S.-H. Kim, S.W. Lee, J.L. Wilson
    ORNL, Oak Ridge, Tennessee
 
 

RF properties of twisted waveguide structures were investigated to show that slow-wave accelerating fields can be excited and used for acceleration of particle at various velocities lately. To build a practical accelerating cavity structure using the twisted waveguide, more development work was needed: cavity structure tuning, end wall effect of the structures, incorporating beam pipes and input power coupler, and HOM damping, etc. In this paper, the practical aspects of the designs to make more complete accelerating structures are discussed with the results of computer simulations.

 
TU6PFP072 SNS Superconducting Linac Power Ramp-Up Status and Plan 1457
 
  • S.-H. Kim, D.E. Anderson, I.E. Campisi, F. Casagrande, M.T. Crofford, R.I. Cutler, G.W. Dodson, J. Galambos, T.W. Hardek, S. Henderson, R. Hicks, M.P. Howell, D. Jeon, Y.W. Kang, K.-U. Kasemir, S.W. Lee, J. Mammosser, M.P. McCarthy, Y. Zhang
    ORNL, Oak Ridge, Tennessee
 
 

Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy


The Spallation Neutron Source (SNS) is a second generation pulsed-neutron source and designed to provide a 1-GeV, 1.44-MW proton beam to a mercury target for neutron production. Since the initial commissioning of accelerator complex in 2006, the SNS has begun neutron production operation and beam power ramp-up has been in progress toward the design goal. Since the design beam power is almost an order of magnitude higher compared to existing neutron facilities, all subsystems of the SNS were designed and developed for substantial improvements compared to existing accelerators and some subsystems are first of a kind. Many performance and reliability aspects were unknown and unpredictable, for which it takes time to understand the systems as a whole and/or needs additional performance improvements. A power ramp-up plan has been revised based on the operation experiences and understandings of limits and limiting conditions through extensive studies with an emphasis on machine availability. In this paper the operational experiences of SNS Superconducting Linac (SCL), the power ramp-up status and plans will be presented including related subsystem issues.