• G.-Y. Hsiung, C.K. Chan, C.-C. Chang, C.L. Chen, S-N. Hsu, H.P. Hsueh, A. Sheng, C.Y. Yang, R. Yb
  NSRRC, Hsinchu
• J.-R. Chen
  National Tsing Hua University, Hsinchu

The Taiwan Photon Source (TPS) vacuum system has been designed for a 3 GeV electron storage ring of 24DBA lattice, 518.4 m circumference, 24 unit cells and 24 long straight sections of 6 in 12 m and 18 in 7 m. The vacuum ducts for each cell made from thick aluminum plates and extruded aluminum beam pipes will be precisely machined and welded for obtaining a low impedance with small quantity of flanges and bellows. The beam ducts in long straight sections will be flat extruded aluminum pipes of 10 mm vertical height inside which will be ready for installation of the undulators without breaking the vacuum. The BPMs, 2 in each straight sections and 5 in each cells, will be fixed on the ground or on the girder rigidly through the strong supports maintaining a displacement of < 0.1 micron against the stress force of 10 kg from the beam ducts. The small aperture of 10 mm inside the aluminum bending chamber rejects the PSD outgas from the crotch absorbers backfilled to the beam channel, while the surface of bending chamber will be cleaned with ozonated water to reach lower thermal outgassing rate that maintains a much lower averaged pressure below 100 nPa inside the beam ducts.