• K. Yokoyama, S. Fukuda, Y. Higashi, T. Higo, N. Kudoh, S. Matsumoto, Y. Watanabe
  KEK, Ibaraki

High-gradient RF breakdown studies have been in progress at Nextef (New X-band Test Facility at KEK) since 2006. To study the characteristics of different materials on high-field RF breakdown, we have performed high-gradient experiments by using narrow waveguides that has a field of around 140 MV/m at 50 MW power. Breakdown rates of stainless-steel and copper cases were measured and the results are described in this paper.

• C. Adolphsen, G.B. Bowden, V.A. Dolgashev, L. Laurent, S.G. Tantawi, F. Wang, J.W. Wang
  SLAC, Menlo Park, California
• S. Döbert, A. Grudiev, G. Riddone, W. Wuensch, R. Zennaro
  CERN, Geneva
• Y. Higashi, T. Higo
  KEK, Ibaraki

Funding: Work supported by the DOE under contract DE-AC02-76SF00515

As part of a SLAC-CERN-KEK collaboration on high gradient X-band structure research, several prototype structures for the CLIC linear collider study have been tested using two of the high power (300 MW) X-band rf stations in the NLCTA facility at SLAC. These structures differ in terms of their manufacturing (brazed disks and clamped quadrants), gradient profile (amount by which the gradient increases along the structure which optimizes efficiency and maximizes sustainable gradient) and HOM damping (use of slots or waveguides to rapidly dissipate dipole mode energy). The CLIC goal in the next few years is to demonstrate the feasibility of a CLIC-ready baseline design and to investigate alternatives which could bring even higher efficiency. This paper summarizes the high gradient test results from the NLCTA in support of this effort.

• Z. Li, A.E. Candel, L. Ge, K. Ko, C.-K. Ng, G.L. Schussman
  SLAC, Menlo Park, California
• S. Döbert, M. Gerbaux, A. Grudiev, W. Wuensch
  CERN, Geneva
• T. Higo, S. Matsumoto, K. Yokoyama
  KEK, Ibaraki

Funding: This work was supported by DOE Contract No. DE-AC02-76SF00515 and used resources of NERSC supported by DOE Contract No. DE-AC02-05CH11231, and of NCCS supported by DOE Contract No. DE-AC05-00OR22725.

Normal conducting accelerator structures such as the X-Band NLC structures and the CLIC structures have been found to suffer damage due to RF breakdown and/or dark current when processed to high gradients. Improved understanding of these issues is desirable for the development of structure designs and processing techniques that improve the structure high gradient performance. While vigorous experimental efforts have been put forward to explore the gradient parameter space via high power testing, comprehensive numerical multipacting and dark current simulations would complement measurements by providing an effective probe for observing interior quantities. In this paper, we present studies of multipacting, dark current, and the associated surface heating in high gradient accelerator structures using the parallel finite element simulation code Track3P. Comparisons with the high power test of the CLIC accelerator structures will be presented.