• C. Bruni, Y. Fedala, J. Haissinski, M. Lacroix, B. Mouton, R. Roux, A. Variola, Z.F. Zomer
  LAL, Orsay
• E. Bressi
  CNAO Foundation, Milan
• P. Brunelle, M.-E. Couprie, J.-C. Denard, N. Guillotin, P. Lebasque, A. Loulergue, P. Marchand, F. Marteau, R. Nagaoka
  SOLEIL, Gif-sur-Yvette
• P. Gladkikh
  NSC/KIPT, Kharkov

The goal of X-ray sources based on Compton back scattering processes is to develop a compact device, which could produce an intense flux of monochromatic X-rays. Compton back-scattering resuls from collisions between laser pulses and relativistic electron bunches. Due to the relative low value of the Compton cross section, a high charge electron beam, a low emittance and a high focusing at the interaction point are required for the electron beam. In addition, the X-ray flux is related to the characteristics of the electron beam, which are themselves dynamically affected by the Compton interaction. One possible configuration is to inject frequently into a storage ring with a low emittance linear accelerator without waiting for the synchrotron equilibrium. As a consequence, the optics should be designed taking into account the characteristics of the electron beam from the linear accelerator. The accelerator ring design for a 50 MeV electron beam, aiming at producing a flux higher than 10¹³ ph/s, will be presented.

• L. Rinolfi, F. Antoniou, H.-H. Braun, Y. Papaphilippou, D. Schulte, A. Vivoli, F. Zimmermann
  CERN, Geneva
• E.V. Bulyak, P. Gladkikh
  NSC/KIPT, Kharkov
• R. Chehab
  IN2P3 IPNL, Villeurbanne
• J.A. Clarke
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• O. Dadoun, P. Lepercq, R. Roux, A. Variola, Z.F. Zomer
  LAL, Orsay
• W. Gai, W. Liu
  ANL, Argonne
• T. Kamitani, T. Omori, J. Urakawa
  KEK, Ibaraki
• M. Kuriki
  HU/AdSM, Higashi-Hiroshima
• I. Pogorelsky, V. Yakimenko
  BNL, Upton, Long Island, New York
• T. Takahashi
  Hiroshima University, Graduate School of Science, Higashi-Hiroshima

The CLIC polarized positron source is based on a positron production scheme in which polarized photons are produced by Compton process. Compton backscattering happens in a so-called "Compton ring" where an electron beam of 1.06 GeV interacts with a powerful laser beam amplified in an optical resonator. The circularly-polarized gamma rays are sent on to a target, producing pairs of longitudinally polarized electrons and positrons. An Adiabatic Matching Device maximizes the capture of the positrons. A normal-conducting 2 GHz Linac accelerates the beam up to 2.424 GeV before injection into the Pre-Damping Ring (PDR). The nominal CLIC bunch population is 4.4x10⁹ particles per bunch. Since the photon flux coming out from a "Compton ring" is not sufficient to obtain the requested charge, a stacking process is required in the PDR. Another option is to use a "Compton Energy Recovery Linac" where a quasi-continual stacking in the PDR could be achieved. A third option is to use a "Compton Linac" which would not require stacking. We describe the overall scheme as well as advantages and constraints of the three different options.