INFN/LNF, Frascati (Roma)
ENEA C.R. Frascati, Frascati (Roma)
ISM-CNR, Rome
The SPARX-FEL project consists in an X-ray-FEL facility which aim is the generation of electron beams characterized by ultra-high peak brightness at the energy of 1.5 and 2.4 GeV. This facility will be built in the Tor Vergata University area in Rome. The paper describe the engineering aspects of the mechanical design of the accelerator, photo-injector, LINACs, bunch compressors, beam distribution, undulators and experimental stations. Morover the integration of accelerator with the civil infrastractures is discussed.
INFN/LNF, Frascati (Roma)
ENEA C.R. Frascati, Frascati (Roma)
Rome University La Sapienza, Roma
LBNL, Berkeley, California
The modeling of the microbunching instability has been carried out for the SPARX FEL accelerator, two configurations have been considered and compared: hybrid compression scheme (velocity bunching plus magnetic compressor) and purely magnetic. The effectiveness of a laser heather in reducing this instability drawbacks on the electron beam quality has also been exploited. Analytical predictions and start to end simulation results are reported in this paper.
Universita' degli Studi di Milano, Milano
Istituto Nazionale di Fisica Nucleare, Milano
INFN/LNF, Frascati (Roma)
ENEA C.R. Frascati, Frascati (Roma)
INFN-Roma, Roma
In this paper a possible experiment with the existing SPARC photoinjector is described to generate sub-picosecond high brightness electron bunches able to produce single spike radiation pulses at 500 nm with the SPARC self-amplified spontaneous emission free-electron laser (SASE-FEL). The main purpose of the experiment will be the production of short electron bunches as long as few SASE cooperation lengths, the determination of the shape of the radiation pulse and the validation of the single spike scaling law, in order to foresee operation at shorter wavelength in the future operation with SPARX. We present in this paper start to end simulations regarding the beam production and FEL performance, and discuss the layout of the machine. The experience, gained from this experiment, will help in the configuration of the VUV and X-ray FEL SPARX to obtain FEL pulses below 10 fs.
INFN/LNF, Frascati (Roma)
UCLA, Los Angeles, California
Istituto Nazionale di Fisica Nucleare, Milano
INFN-Roma II, Roma
ENEA C.R. Frascati, Frascati (Roma)
University of Tehran, Tehran
INFN-Roma, Roma
One of the main goals of the SPARC high brightness photoinjector is the experimental demonstration of the emittance compensation process while compressing the beam with the velocity bunching technique, also named RF compressor. For this reason, the first two S-band travelling wave accelerating structures downstream of the RF gun are embedded in a long solenoid, in order to control the space charge induced emittace oscillations during the compression process. An RF deflecting cavity placed at the exit of the third accelerating structure allows bunch length measurements with a resolution of 50 μm. During the current SPARC run a parametric experimental study of the velocity bunching technique has been performed. The beam bunch length and projected emittance have been measured at 120 MeV as a function of the injection phase in the first linac, and for different solenoid field values. In this paper we describe the experimental layout and the results obtained thus far. Comparisons with simulations are also reported.
ENEA C.R. Frascati, Frascati (Roma)
In this paper the Fast Multipole Approximation is described with regard to the problem of modelling self fields effects in low emittance, high brightness electron beams of interest for future accelerators and light sources. This well established technique is known to scale as O(N) or O(N log N) (depending on details of the implementation) with the number of particles involved in the simulation. Performances and results as a standalone technique or as a method for for fast calculation of boundary conditions together with other approaches based on PDEs are discussed, along with details of a parallel implementation in the tracking code Tredi.
UCLA, Los Angeles, California
INFN/LNF, Frascati (Roma)
ENEA C.R. Frascati, Frascati (Roma)
It has been suggested that an ultra-short, very low charge beam be used to drive short wavelength single-spike operation at the SPARC FEL. This paper explores the development and construction of a longitudinal diagnostic capable of completely characterizing the radiation based on the Frequency-Resolved Optical Gating (FROG) technique. In particular, this paper explores a new geometry based on a Transient-Grating (TG) nonlinear interaction and includes studies of start to end simulations for pulses at the SPARC facility using GENESIS and reconstructed using the FROG algorithm. The experimental design, construction and initial testing of the diagnostic are also discussed.
INFN/LNF, Frascati (Roma)
Istituto Nazionale di Fisica Nucleare, Milano
CEA, Gif-sur-Yvette
INFN-Roma II, Roma
ENEA C.R. Frascati, Frascati (Roma)
SOLEIL, Gif-sur-Yvette
INFN-Roma, Roma
University of Tehran, Tehran
UCLA, Los Angeles, California
The SPARC project foresees the realization of a high brightness photo-injector to produce a 150-200 MeV electron beam to drive 500 nm FEL experiments in SASE, Seeding and Single Spike configurations. The SPARC photoinjector is also the test facility for the recently approved VUV FEL project named SPARX. The second stage of the commissioning, that is currently underway, foresees a detailed analysis of the beam matching with the linac in order to confirm the theoretically prediction of emittance compensation based on the “invariant envelope” matching , the demonstration of the “velocity bunching” technique in the linac and the characterisation of the spontaneous and stimulated radiation in the SPARC undulators. In this paper we report the experimental results obtained so far. The possible future energy upgrade of the SPARC facility to produce UV radiation and its possible applications will also be discussed.
