BNL, Upton, Long Island, New York
CERN, Geneva
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy and the US LHC Accelerator Research Program (LARP).
In the Relativistic Heavy Ion Collider (RHIC) beams collide in the two interaction points IP6 and IP8. An increase of the bunch intensity above 2·1011 in polarized proton operation appears difficult due to the large beam-beam tune spread generated by the two collisions. A low energy electron beam or electron lens has been proposed to mitigate the head on beam-beam effect. In RHIC such a device could be located near IP10. We summarize multi-particle weak-strong beam-beam simulations of head-on beam-beam compensation with an electron lens. The proton beam's lifetime and emittance are calculated and compared for situations with and without an electron lens. Parameters such as the proton bunch intensity, the electron beam intensity and the betatron phase advances between IP8 and IP10 are scanned in the simulations.
BNL, Upton, Long Island, New York
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
After having provided collisions of polarized protons at a beam energy of 100 GeV since 2001, the Relativistic Heavy Ion Collider~(RHIC) at BNL reached its design energy of polarized proton collision at 250 GeV. With the help of the two full Siberian snakes in each ring as well as careful orbit correction and working point control, polarization was preserved during acceleration from injection to 250~GeV. During the course of the Physics data taking, the spin rotators on either side of the experiments of STAR and PHENIX were set up to provide collisions with longitudinal polarization at both experiments. Various techniques to increase luminosity like further beta star squeeze and RF system upgrades as well as gymnastics to shorten the bunch length at store were also explored during the run. This paper reports the performance of the run as well as the plan for future performance improvement in RHIC.
BNL, Upton, Long Island, New York
PVI, Oxnard
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Electron clouds have been observed in many accelerators, including RHIC at BNL. They can limit the machine performance through pressure degradation, beam instabilities or incoherent emittance growth. The formation of electron clouds can be suppressed with beam pipe surfaces that have low secondary electron yield. Also, high wall resistivity in accelerators can result in unacceptably high ohmic heating levels for superconducting magnets. These are concerns RHIC, as its vacuum chamber in the superconducting dipoles is made from relatively high resistivity 316LN stainless steel. The high resistivity can be addressed with a copper (Cu) coating; a reduction in the secondary electron yield can be achieved with a titanium nitride (TiN) or amorphous carbon (a-C) coating. Applying such coatings in an already constructed machine is rather challenging. We sta rted developing a robotic plasma deposition technique for in-situ coating of long, small diameter tubes. The technique entails fabricating a device comprising of staged magnetrons and/or cathodic arcs mounted on a mobile mole for deposition of about 5 μm (a few skin depths) of Cu followed by about 0.1 μm of TiN (or a-C).
BNL, Upton, Long Island, New York
Fermilab, Batavia
Funding: Work supported by U.S. DOE under contract No DE-AC02-98CH1-886
Long-range and head-on beam-beam effects are expected to limit the LHC performance with design parameters. To mitigate long-range effects current carrying wires parallel to the beam were proposed. Two such wires are installed in RHIC where they allow studying the effect of strong long-range beam-beam effects, as well as the compensation of a single long-range interaction. The tests provide benchmark data for simulations and analytical treatments. To reduce the head-on beam-beam effect electron lenses were proposed for both the LHC and RHIC. We present the experimental long-range beam-beam program and report on head-on compensations studies at RHIC, which are primarily based on simulations.
BNL, Upton, Long Island, New York
CERN, Geneva
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In the article we review the nonlinear beam dynamics from nonlinear magnetic fields in the Relativistic Heavy Ion Collider. The nonlinear magnetic fields include the magnetic field errors in the interaction regions, chromatic sextupoles, and sextupole component from arc dipoles. Their effects on the beam dynamics and long-term dynamic apertures are evaluated. The online measurement and correction methods for the IR nonlinear errors, nonlinear chromaticity, and horizontal third order resonance are reviewed. The overall strategy for the nonlinear effect correction in the RHIC is discussed.
BNL, Upton, Long Island, New York
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In preparation for the RHIC polarized proton run 2009, simulations were carried out to evaluate the million turn dynamic apertures for different beta*s at the proposed beam energies of 100 GeV and 250 GeV. One goal of this study is to find out the best beta* for this run. We also evaluated the effects of the second order chromaticity correction. The second order chromaticties can be corrected with the MAD8 Harmon module or by correcting the horizontal and vertical half-integer resonance driving terms.
BNL, Upton, Long Island, New York
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
There is significant interest in RHIC heavy ion collisions at center of mass energies of 5-50 GeV/u, motivated by a search for the QCD phase transition critical point. The low end of this energy range is nearly a factor of four below the nominal RHIC injection center of mass energy of 19.6 GeV/u. There are several operational challenges in the low-energy regime, including harmonic number changes, longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the results of beam tests with protons and gold in 2007–9, including first RHIC operations at √{(sNN)=9.2} GeV and low-energy nonlinear field corrections at √{(sNN)=5} GeV.
BNL, Upton, Long Island, New York
The luminosity of the eRHIC ring-ring design is limited by the beam-beam effect exerted on the electron beam. Recent simulation studies have shown that the beam-beam limit can be increased by means of an electron lens that compensates the beam-beam effect experienced by the electron beam. This scheme requires proper design of the electron ring, providing the correct betatron phase advance between interaction point and electron lens. We review the performance of the eRHIC ring-ring version and discuss various parameter sets, based on different cooling schemes for the proton/ion beam.
BNL, Upton, Long Island, New York
In this report we summarize electron-cloud simulations for the RHIC dipole regions at injection and transition to estimate if scrubbing at injection would reduce the electron cloud density at transition. We simulate the horizontal electron cloud distribution in the RHIC dipoles for secondary electron yields (SEY) from 1.1 to 2.0 at injection (with a bunch intensity of 1.3x109) and at transition (with a bunch intensity of 1.2x109). Also, we unveil the sensitivity to rather small changes in bunch intensity from 1.0 x109 to 1.5x109 , when SEY keep at 1.4 and 1.5 both for injection and transition.