A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Dunham, B.M.

Paper Title Page
MO4PBC03 Developments for Cornell's X-Ray ERL 106
 
  • J.A. Crittenden, I.V. Bazarov, S.A. Belomestnykh, D.H. Bilderback, M.G. Billing, J.D. Brock, E.P. Chojnacki, B.M. Dunham, M. P. Ehrlichman, M.J. Forster, S.M. Gruner, G.H. Hoffstaetter, Y. Li, M. Liepe, C.E. Mayes, A.A. Mikhailichenko, H. Padamsee, S.B. Peck, D. Sagan, V.D. Shemelin, A.B. Temnykh, M. Tigner, V. Veshcherevich
    CLASSE, Ithaca, New York
  • C. Johnstone
    Fermilab, Batavia
 
 

Cornell University is planning to build an Energy-Recovery Linac (ERL) X-ray facility. In this ERL design, a 5 GeV superconducting linear accelerator extends the CESR ring which is currently used for the Cornell High Energy Synchrotron Source (CHESS). Here we describe some of the recent developments for this ERL, including linear and nonlinear optics, tracking studies, vacuum system design, gas and intra beam scattering computations, and collimator and radiation shielding calculations based on this optics, undulator developments, optimization of X-ray beams by electron beam manipulation, technical design of ERL cavities and cryomodules, and preparation of the accelerator site.

 

slides icon

Slides

 
TU2GRI01 Initial Beam Results from the Cornell High-Current ERL Injector Prototype 683
 
  • I.V. Bazarov, S.A. Belomestnykh, E.P. Chojnacki, J. Dobbins, B.M. Dunham, R.D. Ehrlich, M.J. Forster, C.M. Gulliford, G.H. Hoffstaetter, Y. Li, M. Liepe, X. Liu, F. Löhl, D.G. Ouzounov, H. Padamsee, D.H. Rice, V.D. Shemelin, E.N. Smith, K.W. Smolenski, M. Tigner, V. Veshcherevich
    CLASSE, Ithaca, New York
  • H. Li
    Cornell University, Ithaca, New York
  • H. K. Sayed
    JLAB, Newport News, Virginia
 
 

Cornell University has built a high average current electron injector for use with an Energy Recovery Linac. The injector is capable of up to 100 mA average current at 5 MeV (33 mA at 15 MeV) and is expected to produce the ultra low emittances needed for an ERL. This talk will give an overview of the initial performance of this injector and summarize a spectrum of beam physics experiments undertaken to demonstrate low emittance, high average current operation.

 

slides icon

Slides