| Paper | Title | Page |
|---|---|---|
| WE6PFP064 | Achromatic Interaction Point Design | 2649 |
|
||
|
Designers of high-luminosity energy-frontier muon colliders must provide strong beam focusing in the interaction regions. However, the construction of a strong, aberration-free beam focus is difficult and space consuming, and long straight sections generate an off-site radiation problem due to muon decay neutrinos that interact as they leave the surface of the earth. Without some way to mitigate the neutrino radiation problem, the maximum c.m. energy of a muon collider will be limited to about 3.5 TeV. A new concept for achromatic low beta design is being developed, in which the interaction region telescope and optical correction elements, are installed in the bending arcs. The concept, formulated analytically, combines space economy, a preventative approach to compensation for aberrations, and a reduction of neutrino flux concentration. An analytical theory for the aberration-free, low beta, spatially compact insertion is being developed. |
||
| WE6PFP065 | Recent Progress on Design Studies of High-Luminosity Ring-Ring Electron-Ion Collider at CEBAF | 2652 |
|
||
|
Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The conceptual design of a ring-ring electron-ion collider based on CEBAF has been continuously optimized to cover a wide center-of-mass energy region and to achieve high luminosity and polarization to support next generation nuclear science programs. Here, we summarize the recent design improvements and R&D progress on interaction region optics with chromatic aberration compensation, matching and tracking of electron polarization in the Figure-8 ring, beam-beam simulations and ion beam cooling studies. |
||
| WE6PFP093 | Reverse Emittance Exchange for Muon Colliders | 2721 |
|
||
|
Funding: Supported in part by USDOE STTR Grant DE-FG02-05ER86253 Muon collider luminosity depends on the number of muons in the storage ring and on the transverse size of the beams in collision. Six-dimensional cooling schemes now being developed will reduce the longitudinal emittance of a muon beam so that smaller high frequency RF cavities can be used for later stages of cooling and for acceleration. However, the bunch length at collision energy is then shorter than needed to match the interaction region beta function. New ideas to shrink transverse beam dimensions by lengthening each bunch (reverse emittance exchange and bunch coalescing) will help achieve high luminosity in muon colliders with fewer muons. Analytic expressions for the reverse emittance exchange mechanism are derived, including a new resonant method of beam focusing. Correction schemes for the aberrations were explored, and a lattice to implement them was proposed. To mitigate space charge detuning and wake field effects, a scheme was invented to coalesce smaller intensity bunches after they are cooled and accelerated to high energy into intense bunches suitable for a muon collider. |
||
| FR5RFP012 | Epicyclic Helical Channels for Parametric Resonance Ionization Cooling | 4554 |
|
||
|
Funding: Work supported in part in part by DOE contract DE-AC02-07CH11359 and DOE STTR Grant DE-FG02-05ER86253 In order to achieve cooling of muons in addition to 6D helical cooling channel (HCC) [1], we develop a technique based on a parametric resonance. The use of parametric resonances requires alternating dispersion, minimized at locations of thin absorbers, but maximized in between in order to compensate for chromatic aberrations [2]. These solutions can be combined in an Epicyclic Helical Cooling Channel (EHCC) that meets requirements of alternating dispersion of beam periodic orbit with best conditions for maintenance of stable beam transport in a continuous solenoid-type field [3]. We discuss here basic features and new simulation results for EHCC. |