| Paper | Title | Page |
|---|---|---|
| TU5PFP072 | R&D for the Sponge Cleaning of Superconducting RF Cavity | 990 |
|
||
|
The Electro-polishing process is the best candidate of final surface treatment for the production of ILC cavities. Nevertheless, the broad distribution of the gradient caused by field emitters in cavities is sitll a serious problem for the EP process. Ethanole- and degreaser-rinse processes after the EP process were found to be effective to decrease the field emmitter in recent studies, however, these are not perfect yet. We tried to test the sponge cleaning as the post EP process to remove the field emitter inside the cavcity. This article describe the results of series tests with a proto-type sponge-cleaning tool for single-cell cavity at KEK. |
||
| WE5PFP037 | SRF Cavity High-Gradient Study at 805 MHz for Proton and Other Applications | 2076 |
|
||
|
Funding: DTRA 805 MHz elliptical SRF cavities have been used for SNS as the first application for protons. At LANL, an R&D started to explore a capability of getting high-gradient cavities (40-50 MV/m) at this frequency for the future applications such as proton and muon based interrogation testing facility added to the LANSCE accelerator and a power upgrade of the LANSCE accelerator for the fission and fusion material test station. Optimized cell designs for “standard”, “low-loss” and “re-entrant” shapes, cavity test results for “standard” single-cell cavities with temperature mapping as well as surface inspection results will be presented. |