• Z.A. Conway, E.P. Chojnacki, D.L. Hartill, M. Liepe, H. Padamsee, J. Sears
  CLASSE, Ithaca, New York
• M.S. Champion, G. Wu
  Fermilab, Batavia

Funding: Work Supported by the U.S. Department of Energy

To build the ~14,000 cavities required for the ILC each of the three world regions must have a sizable industrial base of qualified companies to draw cavities from. One of these companies, Niowave Inc., recently manufactured six 1.3 GHz single-cell cavities for qualification purposes. All six cavities achieved gradients above 25 MV/m before they were limited by the available RF power (Q-slope) or quenched. This paper will report the results of cold tests for all six cavities and on the causes of quench determined by 2nd sound detection and optical inspection.

• N. Ohuchi, H. Hayano, N. Higashi, H. Nakai, K. Tsuchiya, A. Yamamoto
  KEK, Ibaraki
• T.T. Arkan, H. Carter, M.S. Champion, J. Grimm, J.S. Kerby, D.V. Mitchell, T.J. Peterson, M.C. Ross
  Fermilab, Batavia
• S. Barbanotti, C. Pagani, P. Pierini
  INFN/LASA, Segrate (MI)
• L. Lilje
  DESY, Hamburg

In an attempt at demonstrating an average field gradient of 31.5 MV/m as per the design accelerating gradient for ILC, a program called S1-Global is in progress as an international research collaboration among KEK, INFN, FNAL, DESY and SLAC. The S1-Global cryomodule will contain eight superconducting cavities from FNAL, DESY and KEK. The cryomodule will be constructed by joining two half-size cryomodules, each 6 m in length. The module containing four cavities from FNAL and DESY will be constructed by INFN. The design of this module is based on an improved 3rd generation TTF design. KEK will modify the 6-meter STF cryomodule to contain four KEK cavities. The designs of the cryomodules are ongoing between these laboratories, and the operation of the system is scheduled at the KEK-STF from June 2010. In this paper, the S1-Global cryomodule plan and the module design will be presented. ‘S1-Global collaboration’ as a co-author.