• Y. He, W. Chang, X. Du, Y. Ma, L.P. Sun, Z.J. Wang, J.W. Xia, C. Xiao, Y.Q. Yang, S.H. Zhang, Z.L. Zhang, H.W. Zhao
  IMP, Lanzhou
• J.E. Chen, M. Kang, Y.R. Lu, Q.F. Zhou, K. Zhu
  PKU/IHIP, Beijing

Heavy Ion Research Facility at Lanzhou (HIRFL) consists of two cyclotrons (SFC and SSC), one synchrotron (CSRm), and one storage ring (CSRe). The two cyclotrons are in series as the injector of the synchrotron. An additional LINAC injector for SSC is considered to increase the beam time at targets. The new injector consists of an RFQ and four IH-DTL tanks. A pre-buncher in the front of RFQ is 13 MHz to match the RF frequency of SSC. The LINAC can operate in two modes. In the first mode, the middle-mass ions output with energy of 0.54 MeV/u, and then SSC accelerates them up to the energy of 5.62 MeV/u. The beam is used to do the Super Heavy Elements (SHE) experiments. In the second mode, the very heavy ions output with energy of 0.97 MeV/u, and then SSC accelerates them up to energy of 10.06 MeV/u. The beam is injected into CSRm after stripped. Code LINREV and DAKOTA are used to design and optimize the acceleration structures of DTLs. The energy spread less than ±0.5% and bunch length less than 2.6 ns are achieved at the exit of the last tank. These can match the ideal acceptance of SSC. A simulation from LEBT to exit of DTL is done by Beampath to benchmark the design.

* All authors belong to PKU-IMP RF LINAC Research Center for Heavy Ions.

• Y. Liu, X. Du, X.H. Guo, Y. He, S. Sha, A. Shi, L.P. Sun, Z. Xu, W.-L. Zhan, H. Zhao
  IMP, Lanzhou
• R.A. Jameson, A. Schempp, M. Vossberg, H. Zimmermann
  IAP, Frankfurt am Main
• M. Okamura
  BNL, Upton, Long Island, New York

A compact RFQ for carbon ion beam from a Laser-ion souce is being tested in IMP, Lanzhou. It is the first example of LINAC structures for IMP. Testing schemes and first results are presented.

• Z.L. Zhang, X.H. Guo, Y. He, Y. Liu, S. Sha, A. Shi, L.P. Sun, H.W. Zhao
  IMP, Lanzhou
• R.A. Jameson, A. Schempp
  IAP, Frankfurt am Main
• M. Okamura
  BNL, Upton, Long Island, New York

A RFQ has been designed and built for research of direct plasma injection scheme (DPIS), which can provide high current and highly charged beams. Because of the strong space charge forces of beam from laser ion source, the beam dynamics design of the RFQ was carried out with a new code LINACSrfq which can treat space charge effectively due to equipartitioning design strategy. Another feature of the RFQ is its high energy gain in two-meter long which will be described in detail. Construction of the RFQ cavity and the 100MHz/250kW amplifier has been completed and ready for test. A laser ion source is being tested. The assembling of the whole system including the ion source, the RFQ, the beam analyzing and diagnostic system is being done. Preliminary test results will be presented.