Paper | Title | Page |
---|---|---|
TUP033 | Commissioning of the IH Linac and High Energy Beam Transport of the EBIS Based Preinjector for RHIC | 470 |
|
||
The EBIS based preinjector for RHIC is now being commissioned. The Linac was delivered in April 2010 and commissioning started in May, 2010. It accelerates ions from 0.3 MeV/u to 2 MeV/u with 27 accelerating gaps, one internal quadrupole triplet, and operates at 100.625 MHz. The Linac is followed by a beam transport line to Booster which includes seven quadrupoles, two bunchers, and an achromatic bend system with resolution of 500 at 2 MeV/u to select the required charge state. Diagnostics include a pepperpot emittance probe, phase probes , fast Faraday cup, adjustable slits, three sets of multiwire profile monitors, three current transformers, two Faraday cups, and two beam stops. This contribution will report results of linac tuning and cold measurements, and commissioning of the Linac and high energy transport line with helium and gold beams. |
||
TUP034 | Beam Commissioning Results for the RFQ and MEBT of the EBIS Based Preinjector for RHIC | 473 |
|
||
The EBIS based preinjector for the RHIC is now being commissioned. During the step-wise commissioning of the preinjector from January 2009 to June 2010, the RFQ was commissioned first using Test EBIS in January 2009 and then moved to its final location and commissioned again with RHIC EBIS in March 2010. The RFQ accelerates ions from 17 keV/u to 300 keV/u and operates at 100.625 MHz. The RFQ is followed by a short (81 cm) Medium Energy Beam Transport (MEBT), which consists of four quadrupoles and one buncher cavity. Temporary diagnostics for this commissioning included an emittance probe, TOF system, fast Faraday cup, and beam current measurement units. This contribution will report results of RFQ and MEBT commissioning with helium and gold beams. |