IAP, Frankfurt am Main
The Frankfurt Neutron source FRANZ is under construction*. The ARMADILLO bunch compressor** as a part of it is composed of a 5MHz electric kicker, a magnetic dipole chicane and rf-rebunching cavities. The design phase of the bunch compressor has reached the final stage. A 175MHz 2MeV proton linac forms 100ns long beam pulses consisting of nineμbunches with 150mA. Deflected by the 5MHz kicker theμbunches are guided on different paths to arrive within 1ns at a n-production target. Due to high space charge forces rebuncher cavities are included***. The peak current at the target is expected to be in the range of 10A in a 1ns proton pulse, which is equivalent to a longitudinal pulse compression ratio of 45. A new code specific for complex magnetic multi aperture system and for high current applications has been developed. Hardware designs according to the beam dynamics results are in progress. Improved 3D magnetic and electric fields will be applied in the future beam dynamics studies including high space charge forces. The preliminary designs and the beam dynamics studies will be presented in this contribution.
* O. Meusel, et al.: LINAC06, Knoxville, Tennessee USA, 2006, pp. 159-161.
** L. P. Chau, et al.: EPAC08, Genoa, Italy, 2008, pp. 3578-3580.
*** D. Noll, another contribution at this conference.
IAP, Frankfurt am Main
The Frankfurt Neutron Source (FRANZ) currently under construction at IAP (Goethe University of Frankfurt) is designed to produce short neutron pulses at high intensity and repetition rates up to 250 kHz [*]. To achieve a bunch length of one nanosecond despite the high space charge forces, a bunch compressor of the Mobley type [**] using four dipole magnets and two rebunchers has been developed [***] to merge 9 linac bunches into the final focus. The first rebuncher cavity, a λ/4 resonator operating at 87.5 MHz, has to feature nine beam paths due to the multi-trajectory system. Additionally the gaps have to be displaced relatively to each other in a way that all bunches arrive at the correct rf phase. The second rebunching cavity will provide final focusing as well as an energy variation of ±0.2 MeV in front of the target and will be operating at 175 MHz. This paper presents the design of these novel cavities as well as the simulated beam dynamic properties.
* Meusel et al., LINAC 2006
** Mobley, Phys. Rev. 88(2), 360-361 (1951)
*** Chau et al, LINAC 2010
IAP, Frankfurt am Main
Space charge lenses use a confined electron cloud for the focusing of ion beams. Due to the electric space charge field, focusing is independent of the particle mass. For this reason the application of the space charge lens especially in the field of heavy ion beams is advantageous. Moreover, the trapped non neutral plasma cloud compensates the space charge forces of the ion beam. The focusing strength is given by the confined electron density whereas the density distribution influences the mapping quality of the space charge lens. An important parameter for the focusing capability of the space charge lens is besides the homogeneous electron distribution a high electron density. In ongoing theoretical and experimental work methods have been developed to determine the most important parameters like electron temperature and electron density distribution for an optimized lens design. Based on the experimental results a new space charge lens has been designed to focus low energy heavy ion beams like 2,4 AkeV U4+ at the low energy transport section into the GSI High Current Injector. Experimental results will be presented and compared with numerical simulations.
*W. Barth, "THE INJECTOR SYSTEMS OF THE FAIR PROJECT", LINAC08, Victoria, BC, Canada
IAP, Frankfurt am Main
The Frankfurt Neutron source FRANZ is under construction*. The ARMADILLO bunch compressor** as a part of it is composed of a 5MHz electric kicker, a magnetic dipole chicane and rf-rebunching cavities. The design phase of the bunch compressor has reached the final stage. A 175MHz 2MeV proton linac forms 100ns long beam pulses consisting of nineμbunches with 150mA. Deflected by the 5MHz kicker theμbunches are guided on different paths to arrive within 1ns at a n-production target. Due to high space charge forces rebuncher cavities are included***. The peak current at the target is expected to be in the range of 10A in a 1ns proton pulse, which is equivalent to a longitudinal pulse compression ratio of 45. A new code specific for complex magnetic multi aperture system and for high current applications has been developed. Hardware designs according to the beam dynamics results are in progress. Improved 3D magnetic and electric fields will be applied in the future beam dynamics studies including high space charge forces. The preliminary designs and the beam dynamics studies will be presented in this contribution.
IAP, Frankfurt am Main
High intensity beams which are increasingly needed for a variety of applications pose new challenges for beam chopping. An ExB chopper system for proton beams of up to 200 mA and repetition rates of up to 250 kHz is under development at IAP. It will be tested and installed in the low energy section of the Frankfurt Neutron Source FRANZ at beam energies of 120 keV. The chopper consists of a static magnetic dipole field and a pulsed electric field in a Wien filter-type ExB configuration. The electric field temporarily compensates the magnetic deflection thus creating a proton pulse in forward direction, while the duty cycle of the electric field is minimized in order to reduce the risk of voltage breakdowns. Downstream of the chopper a septum will be used to separate the beams ensuring dumping outside the transport line in order to avoid uncontrolled power deposition and the resultant production of secondary particles. Numeric field optimizations and beam simulations including secondary electron effects are presented. Measurements of the high voltage pulse generator based on MOSFET technology and capable of generating 12 kV at 250 kHz as well as beam deflection experiments are shown.