Paper | Title | Page |
---|---|---|
MOPRO106 | Status of the HZB ERL Prototype BERLinPro | 340 |
|
||
Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of Helmholtz Association. The Berlin Energy Recovery Linac Prototype BERLinPro is to be constructed at the Helmholtz Zentrum site in Berlin. The aim of the project is to expand the required accelerator physics and technology knowledge mandatory for the generation of a high current (100 mA), high brilliance (norm. emittance below 1 mm mrad) cw electron beam. Since the funding decision in October 2010 the project has entered a phase of detailed planning. Hardware specifications have been defined and various components have been ordered. Furthermore, extensive tests of principal superconducting accelerator components successfully demonstrated the envisaged hardware performance. A summary of the most recent activities together with the details of the project timeline for the coming years are given in this paper. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO106 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPRI020 | Introducing GunLab – A Compact Test Facility for SRF Photoinjectors | 630 |
SUSPSNE035 | use link to see paper's listing under its alternate paper code | |
|
||
Funding: Work supported by German Bundesministerium für Bildung und Forschung (BMBF contract 05K12CB2 PCHB and 05K10PEA), Land Berlin and grants of Helmholtz Association Superconducting radio-frequency photoelectron injectors (SRF photoinjectors) are a promising electron source for high brightness accelerators with high average current and short pulse duration like FELs and ERLs. For the upcoming ERL project BERLinPro we want to test and commission different SRF photoinjectors and examine the beam performance of photocathode materials in an independent test facility. Therefore we designed GunLab to characterize the beam parameters from the SRF photoinjectors in a compact diagnostics beamline. In GunLab we want to investigate the complete 6 dimensional phase space as a function of drive laser and RF setup parameters. In this work we present the design and the estimated performance of GunLab. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI020 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPME150 | Spectrometer for SRF Gun | 3608 |
|
||
We report about the design of a spectrometer for energy spectrum measurements of an electron beam generated by a superconducting radio-frequency photoelectron gun (SRF gun), which is under construction at HZB for BERLinPro. The spectrometer shall provide absolute accuracy of energy measurements of about 0.1% and energy resolution about 0.1%. The spectrometer will be also used for single shot phase space measurements in combination with a transverse deflecting cavity. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME150 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |