Paper |
Title |
Page |
TUPRO068 |
Commisioning of the 2.4T Multipole Wiggler and the 6.5T Superconducting Wavelength Shifter at the SIAM Photon Source |
1192 |
|
- P. Sudmuang, S. Klinkhieo, P. Klysubun, S. Kongtawong, S. Krainara, N. Suradet, A. Tong-on
SLRI, Nakhon Ratchasima, Thailand
|
|
|
A 2.4 T hybrid multipole wiggler (MPW) and a 6.5 T superconducting wavelength shifter (SWLS) have been successfully installed and commissioned at Siam Photon Source (SPS). The influence of the two insertion devices on the electron beam dynamic at different operating points have been studied in order to determine the optimal lattice configuration for operation. In this paper, the compensation of the linear optics will be presented, and the commissioning scheme will also be described. In addition, the investigation of the difference between the model and the actual observed machine parameters will be reported in details.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO068
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPRI113 |
Operation of SLRI Cryogenic System for a 6.5 T Superconducting Wavelength Shifter |
2765 |
|
- S. Srichan, Ch. Dhammatong, P. Klysubun, V. Sooksrimuang, K. Takkrathoke, A. Tong-on
SLRI, Nakhon Ratchasima, Thailand
|
|
|
The cryogenic plant at Synchrotron Light Research Institute was designed to be used as the main liquid helium supply for a superconducting wavelength shifter, in order to generate high-energy X-rays from the relatively low-energy 1.2 GeV Siam Photon Source storage ring. The plant was installed and successfully commissioned in the year 2009. During the past three years since commissioning, the cryogenic system had been in operation to perform helium liquefaction without a superconducting magnet. Since the installation of a 6.5 T SWLS in September 2013, the cryogenic system has begun its operation with a full-time load. In this work, the first operation of the cryogenic system with a superconducting insertion device is presented.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI113
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|