Paper |
Title |
Page |
WEPRI045 |
Key Design Features of Crab-Cavity Cryomodule for HiLumi LHC |
2580 |
|
- S.M. Pattalwar, A.J. May, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- G. Burt, B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- O. Capatina
CERN, Geneva, Switzerland
- T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- T.H. Nicol
Fermilab, Batavia, Illinois, USA
|
|
|
A prototype Superconducting RF (SRF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. STFC in collaboration with, University of Lancaster, CERN and FNAL has developed a concept cryomodule that has overcome most of the critical challenges imposed by a series of boundary conditions arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS tunnel. This paper highlights some of the key design features of the cryomodule with the results of the associated mechanical and thermal analysis.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI045
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPRI048 |
Testing and Dressed Cavity Design for the HL-LHC 4R Crab Cavity |
2589 |
|
- B.D.S. Hall, G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- R. Calaga, S. Calatroni, E. Jensen, A. Macpherson, M. Navarro-Tapia
CERN, Geneva, Switzerland
- T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- A.J. May, P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
|
|
|
The High luminosity upgrade to the LHC (HL-LHC) calls for crab cavities to reduce the luminosity loss due to the crossing angle and help provide luminosity levelling. The 4 Rod Crab Cavity (4RCC) is one of three proposed options under consideration. A bare cavity has been prototyped and has undergone recent vertical tests and the results are presented. The dressed cavity includes a power coupler, a lower order mode coupler and two HOM couplers will be presented and discussed.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI048
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|