Paper |
Title |
Page |
MOPRI050 |
Preliminary Study for an RF Photocathode based Electron Injector for AWAKE Project |
717 |
|
- Ö. Mete, G.X. Xia
UMAN, Manchester, United Kingdom
- G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- S. Chattopadhyay
Cockcroft Institute, Warrington, Cheshire, United Kingdom
|
|
|
AWAKE project, a proton driven plasma wakefield acceleration (PDPWA) experiment is approved by CERN. The PDPWA scheme consists of a seeding laser, a drive beam to establish the accelerating wakefields within the plasma cell; and a witness beam to be accelerated. The drive beam protons will be provided by the CERN's SPS. The plasma ionisation will be performed by a seeding laser and the drive beam protons to produce the accelerating wakefields. After establishing the wakefields, witness beam, namely, electron beam from a dedicated source should be injected into the plasma cell. The primary goal of this experiment is to demonstrate acceleration of a 5-15 MeV single bunch electron beam up to 1 GeV in a 10 m of plasma. This paper explores the possibility of an RF photocathode as the electron source for this PDPWA scheme based on the existing PHIN photoinjector at CERN. The modifications to the existing design, preliminary beam dynamics simulations in order to provide the required electron beam are presented in this paper.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI050
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPME008 |
Status of the CLIC-UK R&D Programme on Design of Key Systems for the Compact Linear Collider |
1354 |
|
- P. Burrows, R. Ainsworth, T. Aumeyr, D.R. Bett, N. Blaskovic Kraljevic, L.M. Bobb, S.T. Boogert, A. Bosco, G.B. Christian, L. Corner, F.J. Cullinan, M.R. Davis, D. Gamba, P. Karataev, K.O. Kruchinin, A. Lyapin, L.J. Nevay, C. Perry, J. Roberts, J. Snuverink, J.R. Towler
JAI, Egham, Surrey, United Kingdom
- R. Ainsworth, T. Aumeyr, S.T. Boogert, A. Bosco, P. Karataev, K.O. Kruchinin, L.J. Nevay, J.R. Towler
Royal Holloway, University of London, Surrey, United Kingdom
- P.K. Ambattu, G. Burt, A.C. Dexter, M. Jenkins, S. Karimian, C. Lingwood, B.J. Woolley
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- L.M. Bobb, R. Corsini, D. Gamba, A. Grudiev, A. Latina, T. Lefèvre, C. Marrelli, M. Modena, J. Roberts, H. Schmickler, D. Schulte, P.K. Skowroński, J. Snuverink, S. Stapnes, F. Tecker, R. Tomás, R. Wegner, M. Wendt, W. Wuensch
CERN, Geneva, Switzerland
- J.A. Clarke, S.P. Jamison, P.A. McIntosh, B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- N.A. Collomb, D.G. Stokes
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- L. Corner
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
- W.A. Gillespie, R. Pan, M.A. Tyrk, D.A. Walsh
University of Dundee, Nethergate, Dundee, Scotland, United Kingdom
- R.M. Jones
UMAN, Manchester, United Kingdom
|
|
|
Six UK institutes are engaged in a collaborative R&D programme with CERN aimed at demonstrating key aspects of technology feasibility for the Compact Linear Collider (CLIC). We give an overview and status of the R&D being done on: 1) Drive-beam components: quadrupole magnets and the beam phase feed-forward prototype. 2) Beam instrumentation: stripline and cavity beam position monitors, an electro-optical longitudinal bunch profile monitor, and laserwire and diffraction and transition radiation monitors for transverse beam-size determination. 3) Beam delivery system and machine-detector interface design, including beam feedback/control systems and crab cavity design and control. 4) RF structure design. In each case, where applicable, we report on the status of prototype systems and performance tests with beam at the CTF3, ATF2 and CesrTA test facilities, including plans for future experiments.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME008
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPRI045 |
Key Design Features of Crab-Cavity Cryomodule for HiLumi LHC |
2580 |
|
- S.M. Pattalwar, A.J. May, P.A. McIntosh, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- G. Burt, B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- O. Capatina
CERN, Geneva, Switzerland
- T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- T.H. Nicol
Fermilab, Batavia, Illinois, USA
|
|
|
A prototype Superconducting RF (SRF) cryomodule, comprising multiple compact crab cavities is foreseen to realise a local crab crossing scheme for the “Hi-Lumi LHC”, a project launched by CERN to increase the luminosity performance of LHC. A cryomodule with two cavities will be initially installed and tested on the SPS drive accelerator at CERN to evaluate performance with high-intensity proton beams. STFC in collaboration with, University of Lancaster, CERN and FNAL has developed a concept cryomodule that has overcome most of the critical challenges imposed by a series of boundary conditions arising from; the complexity of the cavity design, the requirement for multiple RF couplers, the close proximity to the second LHC beam pipe and the tight space constraints in the SPS tunnel. This paper highlights some of the key design features of the cryomodule with the results of the associated mechanical and thermal analysis.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI045
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPRI048 |
Testing and Dressed Cavity Design for the HL-LHC 4R Crab Cavity |
2589 |
|
- B.D.S. Hall, G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- R. Calaga, S. Calatroni, E. Jensen, A. Macpherson, M. Navarro-Tapia
CERN, Geneva, Switzerland
- T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- A.J. May, P.A. McIntosh, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
|
|
|
The High luminosity upgrade to the LHC (HL-LHC) calls for crab cavities to reduce the luminosity loss due to the crossing angle and help provide luminosity levelling. The 4 Rod Crab Cavity (4RCC) is one of three proposed options under consideration. A bare cavity has been prototyped and has undergone recent vertical tests and the results are presented. The dressed cavity includes a power coupler, a lower order mode coupler and two HOM couplers will be presented and discussed.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI048
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPRO051 |
Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate |
2983 |
|
- J.W. McKenzie, L.S. Cowie, P. Goudket, B.L. Militsyn
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
- T.J. Jones
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- V.V. Paramonov
RAS/INR, Moscow, Russia
|
|
|
As part of the design of CLARA (Compact Linear Accelerator for Research and Applications), the proposed UK FEL test facility at Daresbury Laboratory, a high repetition rate S-band photoinjector RF gun is being developed. This gun will be able to operate at up to 400 Hz repetition rate in single bunch mode. We present the initial cavity design including its optimisation for the beam dynamics of CLARA. We also present the initial cooling design for the cavity which will enable the high repetition rates to be achieved.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO051
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|