Author: Mickat, S.
Paper Title Page
THPWO007 Advanced Superconducting CW Heavy Ion Linac R&D 3770
 
  • W.A. Barth, S. Mickat, A. Orzhekhovskaya
    GSI, Darmstadt, Germany
  • M. Amberg, K. Aulenbacher, V. Gettmann, S. Jacke
    HIM, Mainz, Germany
  • F.D. Dziuba, H. Podlech, U. Ratzinger
    IAP, Frankfurt am Main, Germany
 
  An advanced upgrade program has to be realized in the next years, such that enhanced primary beam intensities are available. For this a new sc 28 GHz full performance ECR ion source has to be established. Via a new low energy beam line an already installed new RFQ and an IH-DTL will provide for cw-heavy ion beams with high average beam intensity. It is foreseen to build a new cw-heavy ion-linac behind this high charge state injector. In preparation an advanced R&D program is defined: The first linac section comprising a sc CH-cavity embedded by two sc solenoids (financed by HIM and partly by HGF-ARD-initiative) as a demonstrator will be tested in 2014). After successfull testing an advanced cryomodule comprising up to 4 rf cavities is foreseen. First layout scenarios of this advanced test bench will be presented.  
 
THPWO010 Charge Stripping Tests of High Current Uranium Ion Beams with Methane and Hydrogen Gas Strippers and Carbon Foils at the GSI UNILAC 3779
 
  • B. Schlitt, W.A. Barth, G. Clemente, L. Groening, M. Kaiser, B. Lommel, M.T. Maier, S. Mickat, J. Steiner, H. Vormann
    GSI, Darmstadt, Germany
 
  At the GSI UNILAC, a nitrogen gas stripper is routinely used for stripping of heavy ion beams at 1.4 MeV/u. Different approaches to optimize the stripping efficiency as well as different options to increase the ion charge states for delivery to SIS18 are being investigated. The existing gas stripper was operated with methane and hydrogen gas for stripping of high current uranium ion beams. The results as well as the limitations of these tests will be presented and will be compared to standard nitrogen operation of the gas stripper. In addition, newest results using differently prepared carbon stripping foils for the same ion beams will be reported.  
 
THPWO016 Superconducting CH Cavities for Heavy Ion Acceleration 3794
 
  • F.D. Dziuba, M. Amberg, M. Busch, H. Podlech, U. Ratzinger
    IAP, Frankfurt am Main, Germany
  • M. Amberg, K. Aulenbacher, W.A. Barth, S. Mickat
    HIM, Mainz, Germany
  • K. Aulenbacher
    IKP, Mainz, Germany
  • W.A. Barth, S. Mickat
    GSI, Darmstadt, Germany
 
  Funding: Work supported by HIM, GSI and BMBF Contr. No. 06FY7102
To demonstrate the operation ability of superconducting (sc) Crossbar-H-mode (CH) cavity technology a 217 MHz structure of this type is under development at the Institute for Applied Physics (IAP) of Frankfurt University. The cavity has 15 accelerating cells and a design beta of 0.059. It will be equipped with all necessary auxiliaries like a 10 kW power coupler and a tuning system. Currently, the cavity is under construction. Furthermore, this cavity will serve as demonstrator for a sc continuous wave (cw) LINAC at GSI. The proposed cw LINAC is highly requested to fulfil the requirements of nuclear chemistry and especially for a competitive production of new Super Heavy Elements (SHE) in the future. A full performance test by injecting and accelerating a beam from the GSI High Charge Injector (HLI) is planned in 2014. The current status of the sc CH cavity and the demonstrator project is presented.
 
 
THPWO016 Superconducting CH Cavities for Heavy Ion Acceleration 3794
 
  • F.D. Dziuba, M. Amberg, M. Busch, H. Podlech, U. Ratzinger
    IAP, Frankfurt am Main, Germany
  • M. Amberg, K. Aulenbacher, W.A. Barth, S. Mickat
    HIM, Mainz, Germany
  • K. Aulenbacher
    IKP, Mainz, Germany
  • W.A. Barth, S. Mickat
    GSI, Darmstadt, Germany
 
  Funding: Work supported by HIM, GSI and BMBF Contr. No. 06FY7102
To demonstrate the operation ability of superconducting (sc) Crossbar-H-mode (CH) cavity technology a 217 MHz structure of this type is under development at the Institute for Applied Physics (IAP) of Frankfurt University. The cavity has 15 accelerating cells and a design beta of 0.059. It will be equipped with all necessary auxiliaries like a 10 kW power coupler and a tuning system. Currently, the cavity is under construction. Furthermore, this cavity will serve as demonstrator for a sc continuous wave (cw) LINAC at GSI. The proposed cw LINAC is highly requested to fulfil the requirements of nuclear chemistry and especially for a competitive production of new Super Heavy Elements (SHE) in the future. A full performance test by injecting and accelerating a beam from the GSI High Charge Injector (HLI) is planned in 2014. The current status of the sc CH cavity and the demonstrator project is presented.