IPAC2013 - List of Authors (De Prisco, R.)

Paper	Title	Page
THPWO024	PROGRESS ON DTL DESIGN FOR ESS	3815
	M. Comunian, F. Grespan, A. Pisent, C. Roncolato INFN/LNL, Legnaro (PD), Italy R. De Prisco ESS, Lund, Sweden P. Mereu INFN-Torino, Torino, Italy
	In the European Spallation Source (ESS) accelerator, the Drift Tube Linac (DTL) will accelerate a proton beam of 50 mA pulse peak current from 3 to ~80 MeV. In this paper the engineering design of DTL tanks with the beam dynamics errors studies and the RF design are shown.

THPWO070	ESS DTL RF MODELIZATION: FIELD TUNING AND STABILIZATION	3918
	R. De Prisco ESS, Lund, Sweden M. Comunian, F. Grespan, A. Pisent INFN/LNL, Legnaro (PD), Italy A.R. Karlsson Lund University, Lund, Sweden
	The Radio Frequency (RF) design of Drift Tube Linac (DTL) of the European Spallation Source, ESS, has been defined in order to satisfy the accelerating field requirements of beam dynamic studies and to reduce peak field levels in the critical areas. The electro-magnetic field is stabilized with post-couplers. The cells geometries of the DTL are optimized to accommodate permanent magnet quadrupoles (PMQ), to get maximum shunt impedance, to meet the Moretti criterion at the low energy part and to facilitate the mechanical construction.

Paper

Title

Page

PROGRESS ON DTL DESIGN FOR ESS

3815

M. Comunian, F. Grespan, A. Pisent, C. Roncolato
INFN/LNL, Legnaro (PD), Italy
R. De Prisco
ESS, Lund, Sweden
P. Mereu
INFN-Torino, Torino, Italy

In the European Spallation Source (ESS) accelerator, the Drift Tube Linac (DTL) will accelerate a proton beam of 50 mA pulse peak current from 3 to ~80 MeV. In this paper the engineering design of DTL tanks with the beam dynamics errors studies and the RF design are shown.

THPWO070

ESS DTL RF MODELIZATION: FIELD TUNING AND STABILIZATION

3918

R. De Prisco
ESS, Lund, Sweden
M. Comunian, F. Grespan, A. Pisent
INFN/LNL, Legnaro (PD), Italy
A.R. Karlsson
Lund University, Lund, Sweden

The Radio Frequency (RF) design of Drift Tube Linac (DTL) of the European Spallation Source, ESS, has been defined in order to satisfy the accelerating field requirements of beam dynamic studies and to reduce peak field levels in the critical areas. The electro-magnetic field is stabilized with post-couplers. The cells geometries of the DTL are optimized to accommodate permanent magnet quadrupoles (PMQ), to get maximum shunt impedance, to meet the Moretti criterion at the low energy part and to facilitate the mechanical construction.