IPAC2011 - List of Authors (Wake, M.)

Paper

Title

Page

KEK Digital Accelerator and its Beam Commissioning

1920

K. Takayama, T. Arai, Y. Arakida, M. Hasimoto, T. Iwashita, E. Kadokura, T. Kawakubo, T. Kubo, H. Nakanishi, K. Okamura, H. Someya, A. Takagi, M. Wake
KEK, Ibaraki, Japan
T. Adachi, K.W. Leo
Sokendai, Ibaraki, Japan
K. Okazaki
Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan

The digital accelerator (DA), which is a small-scale induction synchrotron no requiring a high-energy injector accelerator and capable of providing a wide variety of ions, has been constructed at KEK*. Since the last winter beam commissioning has been carried out. Preliminary results of the beam commissioning experiment as well as the accelerator itself will be presented at the conference. The KEK-DA consists of a 200 kV high voltage terminal, in which an ECRIS is embedded, 15 m long LEBT, electro-static injection kicker, and a 10 Hz rapid cycle synchrotron, which is the recycle use of the former 500 MeV Booster synchrotron. An ion pulse, which is chopped in 5 μs by the newly developed Marx generator driven chopper**, is guided through the LEBT and injected by the electrostatic kicker, which is turned off before the injected ion pulse completes the first turn. Then the ion pulse is captured with a pair of barrier voltages and accelerated with the induction acceleration voltage through a full acceleration period. Beam commissioning has been started with a He¹⁺ ion beam of 50 micro-ampere. Beam commissioning of other ions such as C, N, O, Ne, and Ar will be expected.
* T. Iwashita et al., “KEK Digital Accelerator”, Phys. Rev. ST-AB, published in 2011.
** T.Adachi et al., “A Solid-State Marx Generator Driven Einzel Lens Chopper”, these proceedings.

Slides WEOBA02 [4.268 MB]

THPO027

Novel Switching Power Supply utilizing SiC-JFET and its Potential for the Digital Accelerator

3400

K. Okamura, T. Iwashita, K. Takayama, M. Wake
KEK, Ibaraki, Japan
K. Ise
Tohoku Electric Power Co., Sendai, Japan
Y. Osawa
SUN-A Corporation, Miyoshi-City, Japan
K. Takaki
Iwate university, Morioka, Iwate, Japan

Funding: Japan Science and Technology Agency
New induction synchrotron system using an induction cell has been developed and constructed at KEK*. We refer to the accelerator using the induction acceleration system combined with digitally controlled PWM power supply as "Digital Accelerator". In that system, the switching power supply is one of the key devices which realize digital acceleration. The requirements of the switching power supply are high voltage (2 kV) and high repetition frequency (1 MHz). In the present system, we used series connected MOSFETs as the switching device and obtained successful operation. However, series connection gives large complexity and less reliability. Among the various switching devices, a SiC-JFET is the promising candidates that substitute existing silicon MOSFET because it has ultrafast switching speed and voltage blocking capability**. Therefore, we have started to develop new device in collaboration with device manufacturers. Switching and heat removal performance of the newly developed SiC-JFET and a future plan will be presented at the conference.
* T. Iwashita et al., “KEK Digital Accelerator”, Phys. Rev. ST-AB, published in 2011.
** K. Ise et al., IEEE Trans. Plasma Sci., pp. 730-736 (2011).

Paper	Title	Page
WEOBA02	KEK Digital Accelerator and its Beam Commissioning	1920
	K. Takayama, T. Arai, Y. Arakida, M. Hasimoto, T. Iwashita, E. Kadokura, T. Kawakubo, T. Kubo, H. Nakanishi, K. Okamura, H. Someya, A. Takagi, M. Wake KEK, Ibaraki, Japan T. Adachi, K.W. Leo Sokendai, Ibaraki, Japan K. Okazaki Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture, Japan
	The digital accelerator (DA), which is a small-scale induction synchrotron no requiring a high-energy injector accelerator and capable of providing a wide variety of ions, has been constructed at KEK. Since the last winter beam commissioning has been carried out. Preliminary results of the beam commissioning experiment as well as the accelerator itself will be presented at the conference. The KEK-DA consists of a 200 kV high voltage terminal, in which an ECRIS is embedded, 15 m long LEBT, electro-static injection kicker, and a 10 Hz rapid cycle synchrotron, which is the recycle use of the former 500 MeV Booster synchrotron. An ion pulse, which is chopped in 5 μs by the newly developed Marx generator driven chopper, is guided through the LEBT and injected by the electrostatic kicker, which is turned off before the injected ion pulse completes the first turn. Then the ion pulse is captured with a pair of barrier voltages and accelerated with the induction acceleration voltage through a full acceleration period. Beam commissioning has been started with a He¹⁺ ion beam of 50 micro-ampere. Beam commissioning of other ions such as C, N, O, Ne, and Ar will be expected. T. Iwashita et al., “KEK Digital Accelerator”, Phys. Rev. ST-AB, published in 2011. ** T.Adachi et al., “A Solid-State Marx Generator Driven Einzel Lens Chopper”, these proceedings.
	Slides WEOBA02 [4.268 MB]

THPO027	Novel Switching Power Supply utilizing SiC-JFET and its Potential for the Digital Accelerator	3400
	K. Okamura, T. Iwashita, K. Takayama, M. Wake KEK, Ibaraki, Japan K. Ise Tohoku Electric Power Co., Sendai, Japan Y. Osawa SUN-A Corporation, Miyoshi-City, Japan K. Takaki Iwate university, Morioka, Iwate, Japan
	Funding: Japan Science and Technology Agency New induction synchrotron system using an induction cell has been developed and constructed at KEK. We refer to the accelerator using the induction acceleration system combined with digitally controlled PWM power supply as "Digital Accelerator". In that system, the switching power supply is one of the key devices which realize digital acceleration. The requirements of the switching power supply are high voltage (2 kV) and high repetition frequency (1 MHz). In the present system, we used series connected MOSFETs as the switching device and obtained successful operation. However, series connection gives large complexity and less reliability. Among the various switching devices, a SiC-JFET is the promising candidates that substitute existing silicon MOSFET because it has ultrafast switching speed and voltage blocking capability. Therefore, we have started to develop new device in collaboration with device manufacturers. Switching and heat removal performance of the newly developed SiC-JFET and a future plan will be presented at the conference. T. Iwashita et al., “KEK Digital Accelerator”, Phys. Rev. ST-AB, published in 2011. ** K. Ise et al., IEEE Trans. Plasma Sci., pp. 730-736 (2011).