Paper | Title | Page |
---|---|---|
TUPO008 | Electron Linac Optimization for Driving Bright Gamma-ray Sources based on Compton Back-scattering | 1461 |
|
||
We study the optimal lay-out and RF frequency for a room temperature GeV-class Electron Linac aiming at producing electron beams that enhance gamma-ray sources based on Compton back-scattering. These emerging novel sources, generating tunable, mono-chromatic, bright photon beams in the range of 5-20 MeV for nuclear physics as well as nuclear engineering, rely on both, high quality electron beams and J-class high repetition-rate synchronized laser systems in order to achieve the maximum spectral density of the gamma-ray beam (# photons/sec/eV). The best option among the conventionally used RF linac-bands (S, C, X) and possible hybrid schemes will be analyzed and discussed, focusing the study in terms of best performances for the gamma-ray source, its reliability and compactness. We show that the best possible candidates for a Gamma-ray driver are quite similar to those of FEL Linacs. | ||
THYB01 | Advanced Beam Manipulation Techniques at SPARC | 2877 |
|
||
SPARC in Frascati is a high brightness photo-injector used to drive Free Electron Laser experiments and explore advanced beam manipulation techniques. The R&D effort made for the optimization of the beam parameters will be presented here, together with the major experimental results achieved. In particular, we will focus on the generation of sub-picosecond, high brightness electron bunch trains via velocity bunching technique (the so called comb beam). Such bunch trains can be used to drive tunable and narrow band THz sources, FELs and plasma wake field accelerators. | ||
![]() |
Slides THYB01 [20.772 MB] | |
THPS102 | Novel Schemes for the Narrow Band Sparc THz Source using a Comb like e-beam | 3672 |
|
||
The development of radiation sources in the THz spectral region has become more and more interesting because of the peculiar characteristics of this radiation: it is non ionizing, it penetrates dielectrics, it is highly absorbed by polar liquids, highly reflected by metals and reveals specific "fingerprint" absorption spectra arising from fundamentals physical processes. The THz source at SPARC is an accelerator based source for research investigations (e.g. material science, biology fields). By means of e-beam manipulation technique, a longitudinal modulated beam, the so-called comb beam, can be produced at Sparc. In terms of THz sources, such e-beam distribution allows to produce high intensitiy narrow band THz radiation, whose spectrum strongly depends on the charge distribution inside the e-beam. Different linac schemes are compared. In particular, spectra obtained using the comb-beam compression through velocity bunching including a IV harmonic RF section is showed. | ||
THPS101 | Present and Perspectives of the Sparc THz Source | 3669 |
|
||
The development of radiation sources in the THz spectral region has become more and more interesting because of the peculiar characteristics of this radiation: it is non ionizing, it penetrates dielectrics, it is highly absorbed by polar liquids, highly reflected by metals and reveals specific "fingerprint" absorption spectra arising from fundamentals physical processes. The THz source at SPARC is an accelerator based source for research investigations (e.g. material science, biology fields). Its measured peak power is of the order of 108 W, very competitive with respect to other present sources. The present status of the source is presented and future perspectives are presented. | ||
THPZ004 | DAΦNE Tune-up for the KLOE-2 Experiment | 3687 |
|
||
Funding: Work supported by the EuCARD research programme within the 'Assessment of Novel Accelerator Concepts' work package (ANAC-WP11). In its continuous evolution DAΦNE, the Frascati lepton collider, is starting a new run for the KLOE-2 experiment, an upgraded version of the KLOE one. A new interaction region, based on the high luminosity Crab-Waist collision scheme, has been designed, built and installed. Several machine subsystems have been revised according to innovative design concepts in order to improve beam dynamics. Collimators and shieldings have been upgraded in order to minimize the background rates on the detector during coasting as well as injection operation. A wide measurement campaign has been undertaken to verify and quantify the effect of the modifications and to tune-up the collider in view of the 3 years long data-taking foreseen to deliver ~5 fb-1 to the experiment. |
||