IPAC2011 - List of Authors (Koubek, B.)

Paper	Title	Page
WEPS037	RF Design of a 325 MHz 4-ROD RFQ	2568
	B. Koubek, A. Schempp, J.S. Schmidt IAP, Frankfurt am Main, Germany L. Groening GSI, Darmstadt, Germany
	Usually 4-ROD Radio Frequency Quadrupoles (RFQ) are built for frequencies up to 216 MHz. For higher frequencies 4-VANE structures are more common. The advantages of 4-Rod structures, the greater flexibility for tuning and being more comfortable for maintenance, are motivating the development of a 4-Rod RFQ for higher frequencies than 216 MHz. In particular a 325 MHz RFQ with an output energy of 3 MeV is needed for the proton linac for the FAIR project of GSI. This paper reports about the design studies and the latest developments of this RFQ.

WEPS041	Tuning of the New 4-Rod RFQ for FNAL	2580
	J.S. Schmidt, B. Koubek, A. Schempp IAP, Frankfurt am Main, Germany
	For the injector upgrade at FNAL a 4-rod Radio Frequency Quadrupole (RFQ) with a resonance frequency of 200 MHz has been build. With this short structure of only 1.3 m a very compact injector design has been realized. Simulations with CST Microwave Studio® were performed for the design. Their results leading to the RF characterizations of the RFQ and the final RF setup which has been accomplished at IAP of the Goethe-University Frankfurt are presented in this paper.

Paper

Title

Page

RF Design of a 325 MHz 4-ROD RFQ

2568

B. Koubek, A. Schempp, J.S. Schmidt
IAP, Frankfurt am Main, Germany
L. Groening
GSI, Darmstadt, Germany

Usually 4-ROD Radio Frequency Quadrupoles (RFQ) are built for frequencies up to 216 MHz. For higher frequencies 4-VANE structures are more common. The advantages of 4-Rod structures, the greater flexibility for tuning and being more comfortable for maintenance, are motivating the development of a 4-Rod RFQ for higher frequencies than 216 MHz. In particular a 325 MHz RFQ with an output energy of 3 MeV is needed for the proton linac for the FAIR project of GSI. This paper reports about the design studies and the latest developments of this RFQ.

WEPS041

Tuning of the New 4-Rod RFQ for FNAL

2580

J.S. Schmidt, B. Koubek, A. Schempp
IAP, Frankfurt am Main, Germany

For the injector upgrade at FNAL a 4-rod Radio Frequency Quadrupole (RFQ) with a resonance frequency of 200 MHz has been build. With this short structure of only 1.3 m a very compact injector design has been realized. Simulations with CST Microwave Studio® were performed for the design. Their results leading to the RF characterizations of the RFQ and the final RF setup which has been accomplished at IAP of the Goethe-University Frankfurt are presented in this paper.