IPAC2011 - List of Authors (Boni, R.)

Paper

Title

Page

Design, Fabrication and High Power RF Test of a C-band Accelerating Structure for Feasibility Study of the SPARC Photo-injector Energy Upgrade

89

D. Alesini, R. Boni, G. Di Pirro, R. D. Di Raddo, M. Ferrario, A. Gallo, V.L. Lollo, F. Marcellini
INFN/LNF, Frascati (Roma), Italy
G. Campogiani, A. Mostacci, L. Palumbo, S. Persichelli, V. Spizzo
Rome University La Sapienza, Roma, Italy
T. Higo, K. Kakihara, S. Matsumoto
KEK, Ibaraki, Japan
S. Verdú-Andrés
TERA, Novara, Italy

The energy upgrade of the SPARC photo-injector from 170 to 250 MeV will be done by replacing a low gradient 3m S-Band structure with two 1.5m high gradient C-band structures. The structures are traveling wave, constant impedance sections, have symmetric waveguide input couplers and have been optimized to work with a SLED RF input pulse. A prototype with a reduced number of cells has been fabricated and tested at high power in KEK (Japan) giving very good performances in terms of breakdown rates at high accelerating gradient (>50 MV/m). The paper illustrates the design criteria of the structures, the fabrication procedure and the high power RF test results.

TUPO008

Electron Linac Optimization for Driving Bright Gamma-ray Sources based on Compton Back-scattering

1461

L. Serafini, F. Broggi, C. De Martinis, D. Giove
Istituto Nazionale di Fisica Nucleare, Milano, Italy
D. Alesini, P. Antici, A. Bacci, M. Bellaveglia, R. Boni, E. Chiadroni, G. Di Pirro, A. Esposito, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, E. Pace, A.R. Rossi, B. Spataro, P. Tomassini, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
C. Maroli, V. Petrillo
Universita' degli Studi di Milano, Milano, Italy
M. Migliorati, A. Mostacci, L. Palumbo
Rome University La Sapienza, Roma, Italy

We study the optimal lay-out and RF frequency for a room temperature GeV-class Electron Linac aiming at producing electron beams that enhance gamma-ray sources based on Compton back-scattering. These emerging novel sources, generating tunable, mono-chromatic, bright photon beams in the range of 5-20 MeV for nuclear physics as well as nuclear engineering, rely on both, high quality electron beams and J-class high repetition-rate synchronized laser systems in order to achieve the maximum spectral density of the gamma-ray beam (# photons/sec/eV). The best option among the conventionally used RF linac-bands (S, C, X) and possible hybrid schemes will be analyzed and discussed, focusing the study in terms of best performances for the gamma-ray source, its reliability and compactness. We show that the best possible candidates for a Gamma-ray driver are quite similar to those of FEL Linacs.

THYB01

Advanced Beam Manipulation Techniques at SPARC

2877

A. Mostacci, D. Alesini, P. Antici, A. Bacci, M. Bellaveglia, R. Boni, M. Castellano, E. Chiadroni, G. Di Pirro, A. Drago, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, E. Pace, A.R. Rossi, B. Spataro, C. Vaccarezza
INFN/LNF, Frascati (Roma), Italy
A. Cianchi
Università di Roma II Tor Vergata, Roma, Italy
B. Marchetti
INFN-Roma II, Roma, Italy
M. Migliorati
University of Rome "La Sapienza", Rome, Italy
L. Palumbo
Rome University La Sapienza, Roma, Italy
V. Petrillo, L. Serafini
Istituto Nazionale di Fisica Nucleare, Milano, Italy
C. Ronsivalle
ENEA C.R. Frascati, Frascati (Roma), Italy

SPARC in Frascati is a high brightness photo-injector used to drive Free Electron Laser experiments and explore advanced beam manipulation techniques. The R&D effort made for the optimization of the beam parameters will be presented here, together with the major experimental results achieved. In particular, we will focus on the generation of sub-picosecond, high brightness electron bunch trains via velocity bunching technique (the so called comb beam). Such bunch trains can be used to drive tunable and narrow band THz sources, FELs and plasma wake field accelerators.

Slides THYB01 [20.772 MB]

THPZ003

The SuperB Project: Accelerator Status and R&D

3684

M.E. Biagini, S. Bini, R. Boni, M. Boscolo, B. Buonomo, T. Demma, E. Di Pasquale, A. Drago, L.G. Foggetta, S. Guiducci, S.M. Liuzzo, G. Mazzitelli, L. Pellegrino, M.A. Preger, P. Raimondi, U. Rotundo, C. Sanelli, M. Serio, A. Stecchi, A. Stella, S. Tomassini, M. Zobov
INFN/LNF, Frascati (Roma), Italy
M.A. Baylac, O. Bourrion, J.-M. De Conto, N. Monseu, C. Vescovi
LPSC, Grenoble, France
K.J. Bertsche, A. Brachmann, Y. Cai, A. Chao, M.H. Donald, R.C. Field, A.S. Fisher, D. Kharakh, A. Krasnykh, K.C. Moffeit, Y. Nosochkov, A. Novokhatski, M.T.F. Pivi, J.T. Seeman, M.K. Sullivan, S.P. Weathersby, A.W. Weidemann, U. Wienands, W. Wittmer, G. Yocky
SLAC, Menlo Park, California, USA
S. Bettoni
PSI, Villigen, Switzerland
A.V. Bogomyagkov, I. Koop, E.B. Levichev, S.A. Nikitin, I.N. Okunev, P.A. Piminov, D.N. Shatilov, S.V. Sinyatkin, P. Vobly
BINP SB RAS, Novosibirsk, Russia
B. Bolzon, M. Esposito
CERN, Geneva, Switzerland
F. Bosi
INFN-Pisa, Pisa, Italy
L. Brunetti, A. Jeremie
IN2P3-LAPP, Annecy-le-Vieux, France
A. Chancé
CEA, Gif-sur-Yvette, France
P. Fabbricatore, S. Farinon, R. Musenich
INFN Genova, Genova, Italy
E. Paoloni
University of Pisa and INFN, Pisa, Italy
C. Rimbault, A. Variola
LAL, Orsay, France
Y. Zhang
IHEP Beijing, Beijing, People's Republic of China

The SuperB collider project has been recently approved by the Italian Government as part of the National Research Plan. SuperB is a high luminosity (10³6 cm^-2 s^-1) asymmetric e⁺e⁻ collider at the Y(4S) energy. The design is based on a “large Piwinski angle and Crab Waist” scheme already successfully tested at the DAΦNE Phi-Factory in Frascati, Italy. The project combines the challenges of high luminosity colliders and state-of-the-art synchrotron light sources, with two beams (e⁺ at 6.7 and e^- at 4.2 GeV) with extremely low emittances and small beam sizes at the Interaction Point. As unique features, the electron beam will be longitudinally polarized at the IP and the rings will be able to ramp down to collide at the tau/charm energy threshold with one tenth the luminosity. The relatively low beam currents (about 2 A) will allow for low running (power) costs compared to similar machines. The insertion of beam lines for synchrotron radiation users is the latest feature included in the design. The lattice has been recently modified to accommodate insertion devices for X-rays production. A status of the project and a description of R&D in progress will be presented.

THPZ004

DAΦNE Tune-up for the KLOE-2 Experiment

3687

C. Milardi, D. Alesini, M.E. Biagini, S. Bini, C. Biscari, R. Boni, M. Boscolo, B. Buonomo, A. Clozza, G.O. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, M. Esposito, L.G. Foggetta, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, S.M. Liuzzo, F. Marcellini, G. Mazzitelli, L. Pellegrino, M.A. Preger, L. Quintieri, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, S. Tomassini, C. Vaccarezza, M. Zobov
INFN/LNF, Frascati (Roma), Italy
S. Bettoni
PSI, Villigen, Switzerland

Funding: Work supported by the EuCARD research programme within the 'Assessment of Novel Accelerator Concepts' work package (ANAC-WP11).
In its continuous evolution DAΦNE, the Frascati lepton collider, is starting a new run for the KLOE-2 experiment, an upgraded version of the KLOE one. A new interaction region, based on the high luminosity Crab-Waist collision scheme, has been designed, built and installed. Several machine subsystems have been revised according to innovative design concepts in order to improve beam dynamics. Collimators and shieldings have been upgraded in order to minimize the background rates on the detector during coasting as well as injection operation. A wide measurement campaign has been undertaken to verify and quantify the effect of the modifications and to tune-up the collider in view of the 3 years long data-taking foreseen to deliver ~5 fb-1 to the experiment.

THPZ024

Updated Design of the Italian SuperB Factory Injection System

3738

S. Guiducci, M.E. Biagini, R. Boni, M.A. Preger, P. Raimondi
INFN/LNF, Frascati (Roma), Italy
J. Brossard, O. Dadoun, P. Lepercq, C. Rimbault, A. Variola
LAL, Orsay, France
A. Chancé
CEA, Gif-sur-Yvette, France
J.T. Seeman
SLAC, Menlo Park, California, USA

The ultra high luminosity B-factory (SuperB) project of INFN requires a high performance and reliable injection system, providing electrons at 4 GeV and positrons at 7 GeV, to fulfill the very tight requirements of the collider. Due to the short beam lifetime, continuous injection of electrons and positrons in both HER and LER rings is necessary to keep the average luminosity at a high level. An updated version of the injection system, optimized at higher repetition frequency is presented. This scheme includes a polarized electron gun, a positron production scheme with electron/positron conversion at low energy 0.6 GeV, and a 1 GeV damping ring to reduce the injected emittance of the positron beam.

Paper	Title	Page
MOPC013	Design, Fabrication and High Power RF Test of a C-band Accelerating Structure for Feasibility Study of the SPARC Photo-injector Energy Upgrade	89
	D. Alesini, R. Boni, G. Di Pirro, R. D. Di Raddo, M. Ferrario, A. Gallo, V.L. Lollo, F. Marcellini INFN/LNF, Frascati (Roma), Italy G. Campogiani, A. Mostacci, L. Palumbo, S. Persichelli, V. Spizzo Rome University La Sapienza, Roma, Italy T. Higo, K. Kakihara, S. Matsumoto KEK, Ibaraki, Japan S. Verdú-Andrés TERA, Novara, Italy
	The energy upgrade of the SPARC photo-injector from 170 to 250 MeV will be done by replacing a low gradient 3m S-Band structure with two 1.5m high gradient C-band structures. The structures are traveling wave, constant impedance sections, have symmetric waveguide input couplers and have been optimized to work with a SLED RF input pulse. A prototype with a reduced number of cells has been fabricated and tested at high power in KEK (Japan) giving very good performances in terms of breakdown rates at high accelerating gradient (>50 MV/m). The paper illustrates the design criteria of the structures, the fabrication procedure and the high power RF test results.

TUPO008	Electron Linac Optimization for Driving Bright Gamma-ray Sources based on Compton Back-scattering	1461
	L. Serafini, F. Broggi, C. De Martinis, D. Giove Istituto Nazionale di Fisica Nucleare, Milano, Italy D. Alesini, P. Antici, A. Bacci, M. Bellaveglia, R. Boni, E. Chiadroni, G. Di Pirro, A. Esposito, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, E. Pace, A.R. Rossi, B. Spataro, P. Tomassini, C. Vaccarezza INFN/LNF, Frascati (Roma), Italy A. Cianchi Università di Roma II Tor Vergata, Roma, Italy C. Maroli, V. Petrillo Universita' degli Studi di Milano, Milano, Italy M. Migliorati, A. Mostacci, L. Palumbo Rome University La Sapienza, Roma, Italy
	We study the optimal lay-out and RF frequency for a room temperature GeV-class Electron Linac aiming at producing electron beams that enhance gamma-ray sources based on Compton back-scattering. These emerging novel sources, generating tunable, mono-chromatic, bright photon beams in the range of 5-20 MeV for nuclear physics as well as nuclear engineering, rely on both, high quality electron beams and J-class high repetition-rate synchronized laser systems in order to achieve the maximum spectral density of the gamma-ray beam (# photons/sec/eV). The best option among the conventionally used RF linac-bands (S, C, X) and possible hybrid schemes will be analyzed and discussed, focusing the study in terms of best performances for the gamma-ray source, its reliability and compactness. We show that the best possible candidates for a Gamma-ray driver are quite similar to those of FEL Linacs.

THYB01	Advanced Beam Manipulation Techniques at SPARC	2877
	A. Mostacci, D. Alesini, P. Antici, A. Bacci, M. Bellaveglia, R. Boni, M. Castellano, E. Chiadroni, G. Di Pirro, A. Drago, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, E. Pace, A.R. Rossi, B. Spataro, C. Vaccarezza INFN/LNF, Frascati (Roma), Italy A. Cianchi Università di Roma II Tor Vergata, Roma, Italy B. Marchetti INFN-Roma II, Roma, Italy M. Migliorati University of Rome "La Sapienza", Rome, Italy L. Palumbo Rome University La Sapienza, Roma, Italy V. Petrillo, L. Serafini Istituto Nazionale di Fisica Nucleare, Milano, Italy C. Ronsivalle ENEA C.R. Frascati, Frascati (Roma), Italy
	SPARC in Frascati is a high brightness photo-injector used to drive Free Electron Laser experiments and explore advanced beam manipulation techniques. The R&D effort made for the optimization of the beam parameters will be presented here, together with the major experimental results achieved. In particular, we will focus on the generation of sub-picosecond, high brightness electron bunch trains via velocity bunching technique (the so called comb beam). Such bunch trains can be used to drive tunable and narrow band THz sources, FELs and plasma wake field accelerators.
	Slides THYB01 [20.772 MB]

THPZ003	The SuperB Project: Accelerator Status and R&D	3684
	M.E. Biagini, S. Bini, R. Boni, M. Boscolo, B. Buonomo, T. Demma, E. Di Pasquale, A. Drago, L.G. Foggetta, S. Guiducci, S.M. Liuzzo, G. Mazzitelli, L. Pellegrino, M.A. Preger, P. Raimondi, U. Rotundo, C. Sanelli, M. Serio, A. Stecchi, A. Stella, S. Tomassini, M. Zobov INFN/LNF, Frascati (Roma), Italy M.A. Baylac, O. Bourrion, J.-M. De Conto, N. Monseu, C. Vescovi LPSC, Grenoble, France K.J. Bertsche, A. Brachmann, Y. Cai, A. Chao, M.H. Donald, R.C. Field, A.S. Fisher, D. Kharakh, A. Krasnykh, K.C. Moffeit, Y. Nosochkov, A. Novokhatski, M.T.F. Pivi, J.T. Seeman, M.K. Sullivan, S.P. Weathersby, A.W. Weidemann, U. Wienands, W. Wittmer, G. Yocky SLAC, Menlo Park, California, USA S. Bettoni PSI, Villigen, Switzerland A.V. Bogomyagkov, I. Koop, E.B. Levichev, S.A. Nikitin, I.N. Okunev, P.A. Piminov, D.N. Shatilov, S.V. Sinyatkin, P. Vobly BINP SB RAS, Novosibirsk, Russia B. Bolzon, M. Esposito CERN, Geneva, Switzerland F. Bosi INFN-Pisa, Pisa, Italy L. Brunetti, A. Jeremie IN2P3-LAPP, Annecy-le-Vieux, France A. Chancé CEA, Gif-sur-Yvette, France P. Fabbricatore, S. Farinon, R. Musenich INFN Genova, Genova, Italy E. Paoloni University of Pisa and INFN, Pisa, Italy C. Rimbault, A. Variola LAL, Orsay, France Y. Zhang IHEP Beijing, Beijing, People's Republic of China
	The SuperB collider project has been recently approved by the Italian Government as part of the National Research Plan. SuperB is a high luminosity (10³6 cm^-2 s^-1) asymmetric e⁺e⁻ collider at the Y(4S) energy. The design is based on a “large Piwinski angle and Crab Waist” scheme already successfully tested at the DAΦNE Phi-Factory in Frascati, Italy. The project combines the challenges of high luminosity colliders and state-of-the-art synchrotron light sources, with two beams (e⁺ at 6.7 and e^- at 4.2 GeV) with extremely low emittances and small beam sizes at the Interaction Point. As unique features, the electron beam will be longitudinally polarized at the IP and the rings will be able to ramp down to collide at the tau/charm energy threshold with one tenth the luminosity. The relatively low beam currents (about 2 A) will allow for low running (power) costs compared to similar machines. The insertion of beam lines for synchrotron radiation users is the latest feature included in the design. The lattice has been recently modified to accommodate insertion devices for X-rays production. A status of the project and a description of R&D in progress will be presented.

THPZ004	DAΦNE Tune-up for the KLOE-2 Experiment	3687
	C. Milardi, D. Alesini, M.E. Biagini, S. Bini, C. Biscari, R. Boni, M. Boscolo, B. Buonomo, A. Clozza, G.O. Delle Monache, T. Demma, E. Di Pasquale, G. Di Pirro, A. Drago, M. Esposito, L.G. Foggetta, A. Gallo, A. Ghigo, S. Guiducci, C. Ligi, S.M. Liuzzo, F. Marcellini, G. Mazzitelli, L. Pellegrino, M.A. Preger, L. Quintieri, P. Raimondi, R. Ricci, U. Rotundo, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, S. Tomassini, C. Vaccarezza, M. Zobov INFN/LNF, Frascati (Roma), Italy S. Bettoni PSI, Villigen, Switzerland
	Funding: Work supported by the EuCARD research programme within the 'Assessment of Novel Accelerator Concepts' work package (ANAC-WP11). In its continuous evolution DAΦNE, the Frascati lepton collider, is starting a new run for the KLOE-2 experiment, an upgraded version of the KLOE one. A new interaction region, based on the high luminosity Crab-Waist collision scheme, has been designed, built and installed. Several machine subsystems have been revised according to innovative design concepts in order to improve beam dynamics. Collimators and shieldings have been upgraded in order to minimize the background rates on the detector during coasting as well as injection operation. A wide measurement campaign has been undertaken to verify and quantify the effect of the modifications and to tune-up the collider in view of the 3 years long data-taking foreseen to deliver ~5 fb-1 to the experiment.

THPZ024	Updated Design of the Italian SuperB Factory Injection System	3738
	S. Guiducci, M.E. Biagini, R. Boni, M.A. Preger, P. Raimondi INFN/LNF, Frascati (Roma), Italy J. Brossard, O. Dadoun, P. Lepercq, C. Rimbault, A. Variola LAL, Orsay, France A. Chancé CEA, Gif-sur-Yvette, France J.T. Seeman SLAC, Menlo Park, California, USA
	The ultra high luminosity B-factory (SuperB) project of INFN requires a high performance and reliable injection system, providing electrons at 4 GeV and positrons at 7 GeV, to fulfill the very tight requirements of the collider. Due to the short beam lifetime, continuous injection of electrons and positrons in both HER and LER rings is necessary to keep the average luminosity at a high level. An updated version of the injection system, optimized at higher repetition frequency is presented. This scheme includes a polarized electron gun, a positron production scheme with electron/positron conversion at low energy 0.6 GeV, and a 1 GeV damping ring to reduce the injected emittance of the positron beam.