• A.J. Moss, S.P. Jamison, P.A. McIntosh, A.E. Wheelhouse
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• B.B. Baricevic
  I-Tech, Solkan

The Low Level RF (LLRF) control system on EMMA (Electron Model for Many Applications), the world's first Non-Scaling Fixed Field Alternating Gradient (NS-FFAG) accelerator is presently being installed and commissioned at Daresbury Laboratory. The LLRF is required to synchronize with ALICE (Accelerators and Lasers in Combined Experiments) its injector, which operates at 1.3GHz, and to produce an offset frequency as required (+1.5Mhz to -4MHz) to then maintain the phase and amplitude of the 19 copper RF cavities of the EMMA machine. The design and commissioning of the LLRF system is presented.

• P.A. McIntosh, A.R. Goulden, A.J. Moss, S.M. Pattalwar, A.E. Wheelhouse
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire

A design optimisation has been performed for an L-band, SRF linac adopting cryomodule technology developed as part of the TESLA Technology Collaboration (TTC). A conventional XFEL cryomodule has been adopted as a baseline design and modified to allow for CW operation at a nominally high Qo level. An assessment of appropriate operating gradient, based upon expected sub-system component costs and SRF linac operating costs, has been performed. The associated cryomodule modifications to accommodate such a large dynamic load are also highlighted, along with identifying an appropriate RF control architecture which can achieve the stringent phase and amplitude stability requirements for NLS.

• A.E. Wheelhouse, C.D. Beard, P. Davies, J.-L. Fernandez-Hernando, E. Frangleton, P.A. McIntosh, A.J. Moss, J.F. Orrett
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• S.A. Belomestnykh, P. Quigley, V. Veshcherevich
  CLASSE, Ithaca, New York
• M.A. Cordwell, J. Strachan
  STFC/DL, Daresbury, Warrington, Cheshire

The Daresbury international Cryomodule Collaboration requires a suitable RF coupler that will fit into the footprint of the ALICE cryomodule, with the ability of transfering potentially up to 30 kW CW of RF power into the cavity whilst maximising the capability for adjusting the coupling. For this a modified Cornell Injector coupler has been used. Modifications to the cold section was carried out. These couplers have now been assembled into a test cavity and conditioned to 30 kW pulsed, 10 kW CW. This paper describes the modifications required to fit inside the cryomodule and details of the tests that were carried out.

• Y.M. Saveliev, R. Bate, R.K. Buckley, S.R. Buckley, J.A. Clarke, P.A. Corlett, D.J. Dunning, A.R. Goulden, S.F. Hill, F. Jackson, S.P. Jamison, J.K. Jones, L.B. Jones, S. Leonard, P.A. McIntosh, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, A.J. Moss, B.D. Muratori, J.F. Orrett, S.M. Pattalwar, P.J. Phillips, D.J. Scott, E.A. Seddon, B.J.A. Shepherd, S.L. Smith, N. Thompson, A.E. Wheelhouse, P.H. Williams
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• P. Harrison, D.J. Holder, G.M. Holder, A.L. Schofield, P. Weightman, R.L. Williams
  The University of Liverpool, Liverpool
• D. Laundy
  STFC/DL, Daresbury, Warrington, Cheshire
• T. Powers
  JLAB, Newport News, Virginia
• G. Priebe, M. Surman
  STFC/DL/SRD, Daresbury, Warrington, Cheshire

Progress made in ALICE (Accelerators and Lasers In Combined Experiments) commissioning and a summary of the latest experimental results are presented in this paper. After an extensive work on beam loading effects in SC RF linac (booster) and linac cavities conditioning, ALICE can now operate in full energy recovery mode at the bunch charge of 40pC, the beam energy of 30MeV and train lengths of up to 100us. This improved operation of the machine resulted in generation of coherently enhanced broadband THz radiation with the energy of several tens of uJ per pulse and in successful demonstration of the Compton Backscattering x-ray source experiment. The next steps in the ALICE scientific programme are commissioning of the IR FEL and start of the research on the first non-scaling FFAG accelerator EMMA. Results from both projects will be also reported.

• A.J. Moss, P.A. Corlett, P.A. McIntosh, J.F. Orrett, A.E. Wheelhouse
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• C.J. White
  STFC/DL, Daresbury, Warrington, Cheshire

The Muon Ionisation Cooling Experiment (MICE) is being constructed at Rutherford Appleton Laboratory in the UK. A muon beam will be cooled through a process of absorption using hydrogen absorbers and acceleration using 200MHz copper RF cavities. This paper describes the RF power source used to accelerate the muon beam, testing of the high voltage power supplies and amplifiers to date and progress on the RF distribution scheme to the accelerating cavities.

• A.E. Wheelhouse, R.K. Buckley, P. Goudket, P.A. McIntosh, A.J. Moss, J.F. Orrett
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire

The RF system on EMMA (Electron Model for Many Applications), the world's first Non-Scaling Fixed Field Alternating Gradient (NS-FFAG) accelerator is presently being installed and commissioned at Daresbury Laboratory. The RF system is required to provide precise amplitude and phase control to each of the 19 identical normal conducting, 1.3 GHz RF cavities which provide the acceleration of the electron beam from 10 MeV to 20 MeV. The system incorporates a high power RF system, which includes a single 100 kW Inductive Output Tube (IOT), a unique RF distribution system and a low level RF (LLRF) control system. The design of the RF system and the commissioning progress to date is presented.

• T.R. Edgecock
  STFC/RAL, Chilton, Didcot, Oxon
• C.D. Beard, J.A. Clarke, S.A. Griffiths, C. Hill, S.P. Jamison, J.K. Jones, A. Kalinin, K.B. Marinov, N. Marks, P.A. McIntosh, B.D. Muratori, J.F. Orrett, Y.M. Saveliev, B.J.A. Shepherd, R.J. Smith, S.L. Smith, S.I. Tzenov, A.E. Wheelhouse
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• J.S. Berg
  BNL, Upton, Long Island, New York
• N. Bliss, B.G. Martlew, C.J. White
  STFC/DL, Daresbury, Warrington, Cheshire
• M.K. Craddock
  UBC & TRIUMF, Vancouver, British Columbia
• J.L. Crisp, C. Johnstone
  Fermilab, Batavia
• Y. Giboudot
  Brunel University, Middlesex
• E. Keil
  CERN, Geneva
• D.J. Kelliher, S. Machida
  STFC/RAL/ASTeC, Chilton, Didcot, Oxon
• S.R. Koscielniak
  TRIUMF, Vancouver
• F. Méot
  CEA, Gif-sur-Yvette
• J. Pasternak
  Imperial College of Science and Technology, Department of Physics, London
• S.L. Sheehy, T. Yokoi
  JAI, Oxford

The Electron Model for Many Applications (EMMA) will be the World's first non-scaling FFAG and is under construction at the STFC Daresbury Laboratory in the UK. Construction is due for completion in March 2010 and will be followed by commissioning with beam and a detailed experimental programme to study the functioning of this type of accelerator. This paper will give an overview of the motivation for the project and describe the EMMA design and hardware. The first results from commissioning will be presented in a separate paper.

• B.D. Muratori, J.K. Jones, A. Kalinin, A.J. Moss, Y.M. Saveliev, R.J. Smith, S.L. Smith, S.I. Tzenov, A.E. Wheelhouse
  STFC/DL/ASTeC, Daresbury, Warrington, Cheshire
• G. Cox
  STFC/DL, Daresbury, Warrington, Cheshire
• D.J. Holder
  Cockcroft Institute, Warrington, Cheshire
• D.J. Kelliher, S. Machida
  STFC/RAL/ASTeC, Chilton, Didcot, Oxon

The first results from commissioning EMMA - the Electron Model of Many Applications- are summarised in this paper. EMMA is a 10 to 20 MeV electron ring designed to test our understanding of beam dynamics in a relativistic linear non-scaling fixed field alternating gradient accelerator (FFAG). EMMA will be the world's first non-scaling FFAG and the paper will outline the characteristics of the beam injected in to the accelerator as well as summarising the results of the extensive EMMA systems commissioning. The paper will report on the results of simulations of this commissioning and on the progress made with beam commissioning.