CERN, Geneva
University of Malta, Faculty of Engineering, Msida
The relation between field and current in each family of the Large Hadron Collider magnets is modeled with a set of empirical equations (FiDeL) whose free parameters are fitted on magnetic measurements. They take into account of residual magnetization, persistent currents, hysteresis, saturation, decay and snapback during initial part of the ramp. Here we give a first summary of the reconstruction of the magnetic field properties based on the beam observables (orbit, tune, coupling, chromaticity) and a comparison with the expectations based on the large set of magnetic measurements carried out during the 5-years-long production. The most critical issues for the machine performance in terms of knowledge of the relation magnetic field vs current are pinned out.
CERN, Geneva
U. Sannio, Benevento
One of the main requirements for the operation of the Large Hadron Collider at CERN is the correction of the dynamic multipole errors produced in the main magnets*. In particular, integrated sextupole errors in the main dipoles must be kept well below 0.1 units to ensure acceptable chromaticity. The feed-forward control of the LHC is based on the Field Description for the LHC (FiDel), a semi-empirical mathematical model capable of forecasting the magnet's behaviour in order to generate suitable corrector current waveforms. Measurement campaigns were recently undertaken to validate the model making use of a novel fast rotating-coil magnetic measurement system (FAME)**, able to detect superconductor decay and snapback transients with unprecedented accuracy and temporal resolution. In this paper we discuss the test setup and the results obtained both on the test bench and in the actual operation of the accelerator.
* P. Xydi et al, "A Demonstration Experiment For The Forecast Of Magnetic Field … ", EPAC 2008
** N. R. Brooks et al, "Estimation Of Mechanical Vibration Of …", IEEE TAS 2008