• E.S. Fischer, J. Macavei, A. Mierau, P. Schnizer, P.J. Spiller, St. Wilfert
  GSI, Darmstadt

The FAIR SIS100 accelerator at GSI Darmstadt will be equipped with fast ramped superconducting magnets. The high current Uranium beam modes with intermediate charge states, require ultra low vacuum pressures that can be achieved in long term operation only by cold beam pipes acting as a cryopump with stable temperatures well below 12 K for all operating cycles. The straightforward layout for reliable cooling usually conflicts with an efficient design for fast ramped superconducting accelerator magnets, strongly affected by AC loss generation, field distortion and mechanical stability problems. A full functional vacuum chamber design for SIS 100 has to take into account all these conflicting boundary conditions and trade off between mechanical stability, acceptable field distortions, AC loss minimisation and achievable temperatures. We discuss the cooling conditions for the dipoles and for the beam pipe including first test results. The analysis of the principal design aspects for the vacuum chamber with respect to the magnets operation parameters and an integral design approach are given. We present a technological feasible solution for model testing and full scale manufacturing.

• P. Puppel, U. Ratzinger
  IAP, Frankfurt am Main
• L.H.J. Bozyk
  TU Darmstadt, Darmstadt
• P.J. Spiller
  GSI, Darmstadt

StrahlSim is a unique code for the simulation of charge exchange driven beam loss and dynamic vacuum effects in heavy ion synchrotrons. Dynamic vacuum effects are one of the most challenging problems for accelerators using intermediate charge state, high intensity heavy ion beams (e.g. AGS Booster, LEIR, SIS18). StrahlSim can be used as a design tool for synchrotrons, e.g. for the estimation of pumping power needed to stabilize the dynamic vacuum. Recently, StrahlSim has been extended to simulate time dependent longitudinal pressure profiles. The new code calculates a self-consistent static pressure distribution along the accelerator and simulates local pressure rises caused by dynamic and systematic beam losses. StrahlSim determines the loss distribution of charge exchanged beam ions and respects the beam energy dependence of the charge exchange cross sections. The beam loss calculated by means of the new time dependent longitudinal pressure profiles has been benchmarked with measured data from the latest SIS18 machine experiments.

• P.J. Spiller, H. Eickhoff, H. Kollmus, P. Puppel, H. Reich-Sprenger
  GSI, Darmstadt
• L.H.J. Bozyk
  FIAS, Frankfurt am Main

After partially completing the upgrade program of SIS18, the number of intermediate charge state heavy ions accelerated to the FAIR booster energy of 200 MeV/u, could be increased by a factor of 50. Meanwhile, more than 10¹⁰ Uranium ions with charge state 27+ have been accelerated with moderate beam loss by ionization and reasonably stable residual gas pressure conditions. The specific challenge for the SIS18 booster operation is the high cross section for ionization due to the low charge state in combination with gas desorption processes and the dynamic vacuum pressure. Especially for this operation mode which is requied to match the intensity requirements for FAIR, an extended upgrade program of SIS18 is presently ongoing and partially completed. The achieved progress in minimizing the ionization beam loss underlines that the chosen technical strategies described in this report are appropriate.

• P.J. Spiller, U. Blell, L.H.J. Bozyk, H. Eickhoff, E.S. Fischer, E. Floch, F. Hagenbuck, M. Kauschke, A. Krämer, J.P. Meier, C. Mühle, N. Pyka, S. Ratschow, H. Reich-Sprenger, P. Schnitzer, J. Stadlmann, St. Wilfert
  GSI, Darmstadt

The engineering design, including the specifications for the accelerator components of the FAIR synchrotron SIS100 has been summarized in the Technical Design Report. The final stage of technical planning shall approach production readiness for the major technical systems in 2010. Significant progress has been achieved in the design of the cryomagnetic system with its main dipole and quadrupole modules, enabling the production of the first pre-series dipole magnet. Slight modifications of the lattice have been implemented to equalize most of the cryostat interconnections, leading to a simplified design and installation effort, and a reduced variety of components and spar parts. The new parallel tunnel allows optimal short interconnections between the supply units and power converters and the accelerator components. The status of the engineering design of SIS100 will be reported.

• A. Saa Hernandez, H. Mueller, N. Pyka, P.J. Spiller
  GSI, Darmstadt
• U. Ratzinger
  IAP, Frankfurt am Main

With the ability to accelerate heavy ions up to an energy of 32 GeV/u, the SIS300 superconducting (sc) synchrotron is a central part of the new FAIR facility at GSI-Darmstadt. SIS300 will provide beams with a 20-fold increase in energy and, by means of a stretcher mode or a fast ramped mode (1 T/s), 100-10000 times higher average intensity. The beam from SIS300 will be extracted towards the experiments using resonant slow extraction, thus SIS300 becomes the first superconducting synchrotron worldwide with this feature. Coupling and persistent currents are the main practical limitation for operation of sc magnets at high ramping rates and long slow extraction plateaus. The effect of the persistent currents, which are time dependent and depend as well on the magnet's history, is especially critical for slow extraction at low energies. These effects determine the tolerances on magnetic components. In order to address this issue, detailed simulations of beam dynamics at slow extraction have been performed. In particular, the optimization of the lattice and its optical parameters for a low-loss extraction in the presence of steady and time-dependent field components will be presented.

• L.H.J. Bozyk
  TU Darmstadt, Darmstadt
• D.H.H. Hoffmann, H. Kollmus, P.J. Spiller
  GSI, Darmstadt

The central accelerator SIS100 of the FAIR-facility will provide high intensity, intermediate charge state heavy ion beams. In order to assure a reliable operation with the intermediate charge states, a special synchrotron design, including ion catcher system had to be developed. Intermediate charge state heavy ions suffer from high cross sections for ionization. Due to the dedicated synchrotron layout, ions which have been further stripped by collisions with residual gas atoms are not lost uncontrolled onto the beam pipe but are caught by the ion catcher system in the cryogenic arcs. The construction and test of a cryo-catcher prototype at GSI is a workpackage of the EU-FP7 project COLMAT. A prototype catcher including cryostat will be set-up at GSI to perform measurements with heavy ion beams of the heavy ion synchrotron SIS18.

• J. Stadlmann, H. Kollmus, E. Mustafin, I.J. Petzenhauser, P.J. Spiller, I. Strašík, N.A. Tahir, C. Trautmann
  GSI, Darmstadt
• L.H.J. Bozyk, M. Krause
  TU Darmstadt, Darmstadt
• M. Tomut
  INFIM, Bucharest

Within the frame of the EuCARD program, the GSI Darmstadt is performing accelerator R&D in workpackage 8: ColMat. The effort is focused on materials important for building the FAIR accelerator facility at GSI and the LHC upgrade at CERN. Accelerator components and especially protection devices have to be operated in high dose environments. The radiation hazard occurs either by the primary proton and ion beams or the secondary radiation. Detailed numerical simulations have been carried out to study the damage caused to solid targets by the full impact of the LHC beam as well as the SPS beam. Tungsten, copper and graphite targets have been studied. Experimental an theoretical studies on radiation damage on materials used for the LHC upgrade and the FAIR accelerators are performed at the present GSI experimental facilities. Technical decisions based on these results will have an impact on the FAIR component specifications. A cryogenic ion-catcher prototype will be constructed and tested. The ion-catcher is essential for reaching highest heavy ion beam intensities in SIS100. The prototype will be set-up at GSI to perform measurements with heavy ion beams of synchrotron SIS18.