• C. Christou, J.A. Dobbing, R.T. Fielder, I.P.S. Martin, S.J. Singleton
  Diamond, Oxfordshire

Diamond Light Source has delivered beam for users exclusively in top-up mode since the end of October 2008. In this mode, a small number of single bunches are injected into specific buckets of the storage ring every ten minutes in order to maintain a constant beam current and fill pattern. During top-up the storage ring current is held within a window of approximately 1.5mA around the target current, generally 250mA, for a variety of fill patterns, including a two-thirds storage ring fill and a hybrid fill in which an intense single bunch is added to the normal fill pattern. Top-up has run continuously for several days on many occasions, with injection efficiency into the storage ring of typically 60%-95% even with 10 in-vacuum insertion device in operation with a permitted minimum gap of 5 mm. The effect of insertion devices, pulsed magnet stability and storage ring beam optics on top-up reliability and performance is examined, and the development of tools for the control of top-up and storage ring fill is detailed.