• G. Serianni, P. Agostinetti, V. Antoni, G. Chitarin, E. Gazza, N. Marconato, N. Pilan, P. Veltri
  Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova
• M. Cavenago
  INFN/LNL, Legnaro (PD)
• G. Fubiani
  GREPHE/LAPLACE, Toulouse

The thermonuclear fusion experiment ITER, requires 33 MW of auxiliary heating power from two Neutral Beam Injectors (NBI), each of them providing 40 A of negative deuterium ions. The EU activities oriented to the realisation of the electrostatic accelerator comprise the construction in Padova of SPIDER, a facility devoted to the optimisation of the beam source. SPIDER parameters are: 100 keV acceleration, 40/60 A (deuterium/hydrogen) current. For the optimised SPIDER accelerator the present contribution provides a characterisation of secondary particles, which include electrons produced by impact of ions on grid surfaces, stripped from negative ions inside the accelerator, and produced by ionisation of the background gas, and the corresponding positive ions. Currents and heat deposited on the various grids and spatial distribution by secondaries will be described. It is found that most of the heat loads on the accelerator grids is due to electrons; moreover the features of secondaries exiting the accelerator and back-streaming towards the source will be presented. The results will be compared with old investigations concerning the NBI 1 MeV accelerator.

• M. Cavenago, T. Kulevoy, S. Petrenko
  INFN/LNL, Legnaro (PD)
• V. Antoni, G. Serianni, P. Veltri
  Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova

The development of neutral beam injectors (NBI) for tokamak like the ITER project and beyond requires high performance and huge negative ion sources (40 A of D- beam required); it was recently accepted that inductive plasma coupled (ICP) radiofrequency sources are the preferred option. It is therefore useful to have a moderate size source of modular design to test and verify both construction technologies and components and simulation codes; here the NIO1 design (60 kV, 9 beamlets of 15 mA H^- each) and construction status are described. Source is assembled from disk shaped modules, for rapid replacement; the beamlets are arranged in 3 times 3 square matrix so that 90 degree rotation of modules is possible and allows to cross or to align the magnetic filters used in the source. The 2 MHz rf coil and the rf window are a simply replaceable module. Extensive rf absorption and magnetic coil simulations were performed. Related beam simulation and fast emittance scanner development are described elsewhere.