| Paper | Title | Page |
|---|---|---|
| MOPEA021 | PAMELA Overview and Status | 112 |
|
||
|
The status of PAMELA (Particle Accelerator for MEdicaL Applications) ' an accelerator for proton and light ion therapy using a non-scaling FFAG (ns-FFAG) accelerator ' is reviewed and discussed. |
||
| WEPE051 | Muon Cooling Performance in Various Neutrino Factory Cooling Cell Configurations using G4MICE | 3458 |
|
||
|
The Neutrino Factory is a planned particle accelerator complex that will produce an intense, focused neutrino beam, using neutrinos from muon decay. Such high neutrino intensities can only be achieved by reducing the muon beam emittance using an ionization cooling system. The G4MICE software is used to study the performance of various cooling cell configurations. A comparison is drawn between the cooling in the FS2 cells, the baseline Neutrino Factory and doublet cells. The beam dynamics in each of cooling channels are presented. The lattices are compared with respect to the equilibrium emittance, muon transmission, acceptance and evolution of emittance along the channel. Conclusions for a possible optimisation of the future muon cooling channel of the Neutrino Factory are presented. |
||
| WEPE054 | The MICE Muon Beam: Status and Progress | 3467 |
|
||
|
The international Muon Ionisation Cooling Experiment (MICE) is designed to provide a proof of principal of the ionisation cooling technique proposed to reduce the muon beam phase space at a future Neutrino Factory or Muon Collider. The pion production target is a titanium cylinder that is dipped into the proton beam of the Rutherford Appleton Laboratory's ISIS 800 MeV synchrotron. Studies of the particle rate in the MICE muon beam are presented as a function of the beam loss induced in ISIS by the MICE target. The implications of the observed beam loss and particle rate on ISIS operation and MICE data taking is discussed. |
||
| WEPE056 | Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force | 3473 |
|
||
|
The next generation of lepton flavour violation experiments will use high intensity and high quality muon beams. Such beams can be produced by sending a short proton pulse to the pion production target, capturing pions and performing RF phase rotation on the resulting muon beam in an FFAG ring, which was proposed for the PRISM project. A PRISM task force was created to address the accelerator and detector issues that need to be solved in order to realise the PRISM experiment. The parameters of the initial proton beam required and the PRISM experiment are reviewed. Alternative designs of the PRISM FFAG ring are presented and compared with the reference design. The ring injection/extraction system, matching with the solenoid channel and progress on the ring's main hardware systems like RF and kicker magnet are discussed. The activity on the simulation of a high sensitivity experiment and the impact on physics reach is described. The progress and future directions of the study are presented in this paper. |
||
| WEPE057 | Injection/Extraction System of the Muon FFAG for the Neutrino Factory | 3476 |
|
||
|
Nonscaling FFAG is required for the muon acceleration in the Neutrino Factory, which baseline design is under investigation in the International Design Study (IDS-NF). In order to inject/extract the muon beam with a very large emittance, several strong kickers with a very large aperture are required distributed in many lattice cells. Once the sufficient orbit separation is obtained by the kickers, the final degree of separation from the lattice is made by the septum, which needs to be superconducting. The geometry of the symmetric solutions allowing to inject/extract both signs of muons is presented. The preliminary design of the kicker and septum magnets is given. |
||
| THPEB034 | The Design of the MEBT for the PAMELA Medical FFAG | 3960 |
|
||
|
The PAMELA medical FFAG complex under design in the UK, aims to operate with both proton and carbon beams for hadron therapy. Medium energy beam transfer(MEBT) of PAMELA consists of the proton beam line coming out of the injector cyclotron, carbon beam transfer from the independent carbon 6+ injector linac, switching dipole when both beam merge and transfer line toward the PAMELA NS-FFAG. The MEBT layout and design, which needs to incorporate the beam chopper for the intensity modulation are discussed. The careful matching of optical functions between various components in the MEBT and beam dynamics simulations are presented. |
||
| THPEB035 | Solenoid Fringe Field Effects for the Neutrino Factory Linac - MAD-X Investigation | 3963 |
|
||
|
International Design Study for the Neutrino Factory (IDS-NF) assumes the first stage of muon acceleration (up to 900 MeV) to be implemented with a solenoid based Linac. The Linac consists of three styles of cryo-modules,containing focusing solenoids and varying number of SRF cavities for acceleration. Fringe fields of the solenoids and the focusing effects in the SRF cavities have significant impact on the transverse beam dynamics. Using an analytical formula,the effects of fringe fields and cavities are studied in MAD-X. The resulting betatron functions are compared with the results of beam dynamics simulations using OptiM code. |
||
| THPEC090 | The EMMA Non-scaling FFAG | 4266 |
|
||
|
The Electron Model for Many Applications (EMMA) will be the World's first non-scaling FFAG and is under construction at the STFC Daresbury Laboratory in the UK. Construction is due for completion in March 2010 and will be followed by commissioning with beam and a detailed experimental programme to study the functioning of this type of accelerator. This paper will give an overview of the motivation for the project and describe the EMMA design and hardware. The first results from commissioning will be presented in a separate paper. |
||
| MOPD016 | Injection Upgrades for the ISIS Synchrotron | 705 |
|
||
|
The ISIS Facility based at the Rutherford Appleton Laboratory in the UK is the world's most productive spallation neutron source. Presently it runs at beam powers of 0.2 MW, with RF upgrades in place to supply increased powers for the new Second Target Station. Increasing injection energy into the synchrotron beyond the existing 70 MeV level has significant potential to increase intensity as a result of reduced space charge. This paper outlines studies for this upgrade option, which include magnet and power supply upgrades to achieve a practical injection system, management of increased injection region activation levels due to higher energy un-stripped particles and ensuring the modified longitudinal and transverse beam dynamics during injection and acceleration are possible with low loss at higher intensity levels. |
||
| WEPE057 | Injection/Extraction System of the Muon FFAG for the Neutrino Factory | 3476 |
|
||
|
Nonscaling FFAG is required for the muon acceleration in the Neutrino Factory, which baseline design is under investigation in the International Design Study (IDS-NF). In order to inject/extract the muon beam with a very large emittance, several strong kickers with a very large aperture are required distributed in many lattice cells. Once the sufficient orbit separation is obtained by the kickers, the final degree of separation from the lattice is made by the septum, which needs to be superconducting. The geometry of the symmetric solutions allowing to inject/extract both signs of muons is presented. The preliminary design of the kicker and septum magnets is given. |
||
| THPEB033 | Injection of Proton and Carbon 6+ into the Non-scaling FFAG | 3957 |
|
||
|
For the PAMELA medical non-scaling FFAG, carbon 6+ as well as proton particles are required. The general injection layout based on a cyclotron for proton and a Linac for carbon is considered. There are two options for pre-accelerating carbon ions for PAMELA, either accelerating carbon with the charge state 4+ from the ion source and stripping after the pre-accelerator or directly accelerating carbon 6+ ions all the way from the ion source. For both options solution has been investigated. Simulations of beam dynamics for both particle species are presented. The resulting schemes based on either the single turn or multiturn injection into the first FFAG ring are discussed. |
||
| WEPE056 | Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force | 3473 |
|
||
|
The next generation of lepton flavour violation experiments will use high intensity and high quality muon beams. Such beams can be produced by sending a short proton pulse to the pion production target, capturing pions and performing RF phase rotation on the resulting muon beam in an FFAG ring, which was proposed for the PRISM project. A PRISM task force was created to address the accelerator and detector issues that need to be solved in order to realise the PRISM experiment. The parameters of the initial proton beam required and the PRISM experiment are reviewed. Alternative designs of the PRISM FFAG ring are presented and compared with the reference design. The ring injection/extraction system, matching with the solenoid channel and progress on the ring's main hardware systems like RF and kicker magnet are discussed. The activity on the simulation of a high sensitivity experiment and the impact on physics reach is described. The progress and future directions of the study are presented in this paper. |