• D.P. Peterson, J.P. Alexander, C.J. Conolly, N. Eggert, E. Fontes, W.H. Hopkins, B. Kreis, A. Lyndaker, M.P. McDonald, M.A. Palmer, M.C. Rendina, P. Revesz, N.T. Rider, J.J. Savino, R.D. Seeley
  CLASSE, Ithaca, New York
• J.W. Flanagan
  KEK, Ibaraki

We report on the design and operation of the CesrTA x-ray beam size monitor (xBSM). The xBSM resolution must be sufficient to measure vertical beam sizes of order 10um by imaging 2-4keV synchrotron radiation photons onto a one-dimensional photodiode array. Instrumentation in the evacuated x-ray beam line includes upstream interchangeable optics elements (slits, coded apertures, and Fresnel zone plates), a monochromator and an InGaAs photodiode detector. The readout is a beam-synchronized FADC that is capable of parallel measurement of consecutive bunches with 4ns spacing. The xBSM has been used to measure beam sizes during the August 2009, November 2009, and April 2010 runs. Single turn measurements are fit to characteristic image shapes to extract beam sizes independent of position variations. The turn-averaged beam size provides feedback for low-emittance tuning.

• M.A. Palmer, J.P. Alexander, M.G. Billing, J.R. Calvey, C.J. Conolly, J.A. Crittenden, J. Dobbins, G. Dugan, N. Eggert, E. Fontes, M.J. Forster, R.E. Gallagher, S.W. Gray, S. Greenwald, D.L. Hartill, W.H. Hopkins, D.L. Kreinick, B. Kreis, Z. Leong, Y. Li, X. Liu, J.A. Livezey, A. Lyndaker, J. Makita, M.P. McDonald, V. Medjidzade, R.E. Meller, T.I. O'Connell, S.B. Peck, D.P. Peterson, G. Ramirez, M.C. Rendina, P. Revesz, D.H. Rice, N.T. Rider, D. L. Rubin, D. Sagan, J.J. Savino, R.M. Schwartz, R.D. Seeley, J.W. Sexton, J.P. Shanks, J.P. Sikora, E.N. Smith, C.R. Strohman, H.A. Williams
  CLASSE, Ithaca, New York
• F. Antoniou, S. Calatroni, M. Gasior, O.R. Jones, Y. Papaphilippou, J. Pfingstner, G. Rumolo, H. Schmickler, M. Taborelli
  CERN, Geneva
• D. Asner
  Carleton University, College of Natural Sciences, Ottawa, Ontario
• L. Boon, A.F. Garfinkel
  Purdue University, West Lafayette, Indiana
• J.M. Byrd, C.M. Celata, J.N. Corlett, S. De Santis, M.A. Furman, A. Jackson, R. Kraft, D.V. Munson, G. Penn, D.W. Plate, M. Venturini
  LBNL, Berkeley, California
• B.T. Carlson
  Grove City College, Grove City, Pennsylvania
• T. Demma
  INFN/LNF, Frascati (Roma)
• R.T. Dowd
  ASCo, Clayton, Victoria
• J.W. Flanagan, P. Jain, K. Kanazawa, K. Kubo, K. Ohmi, H. Sakai, K. Shibata, Y. Suetsugu, M. Tobiyama
  KEK, Ibaraki
• D. Gonnella
  Clarkson University, Potsdam, New York
• W. Guo
  BNL, Upton, Long Island, New York
• K.C. Harkay
  ANL, Argonne
• R. Holtzapple
  CalPoly, San Luis Obispo, CA
• J.K. Jones, A. Wolski
  Cockcroft Institute, Warrington, Cheshire
• D. Kharakh, J.S.T. Ng, M.T.F. Pivi, L. Wang
  SLAC, Menlo Park, California
• M.C. Ross, C.-Y. Tan, R.M. Zwaska
  Fermilab, Batavia
• L. Schächter
  Technion, Haifa
• E.L. Wilkinson
  Loyola University, Chicago, Illinois

The Cornell Electron Storage Ring (CESR) has been reconfigured as a test accelerator (CesrTA) for a program of electron cloud (EC) research at ultra low emittance. The instrumentation in the ring has been upgraded with local diagnostics for measurement of cloud density and with improved beam diagnostics for the characterization of both the low emittance performance and the beam dynamics of high intensity bunch trains interacting with the cloud. Finally a range of EC mitigation methods have been deployed and tested. Measurements of cloud density and its impact on the beam under a range of conditions will be presented and compared with simulations. The effectiveness of a range of mitigation techniques will also be discussed.

Slides