• A. Loulergue, C. Benabderrahmane, F. Bouvet, P. Brunelle, M.-E. Couprie, J.-C. Denard, J.-M. Filhol, C. Herbeaux, P. Lebasque, V. Leroux, A. Lestrade, O. Marcouillé, J.L. Marlats, F. Marteau, T. Moreno, A. Nadji, L.S. Nadolski, F. Polack, A. Somogyi, M.-A. Tordeux
  SOLEIL, Gif-sur-Yvette

SOLEIL is the French 2.75 GeV high brilliance third generation synchrotron light source delivering photons to 20 beamlines with a current of 400 mA in multibunch or hybrid modes, and 60 mA in 8 bunch mode. There are already 17 insertion devices installed and 9 others are planned in the next 2 coming years. Among them, two canted in vacuum insertion devices are planned, for the Nanoscopium and Tomography beamlines, and will be accommodated in a 12 m long straight section, with a 6.5 mrad separation angle. These ~150 m long beamlines will exploit the high brilliance and coherence characteristics of the X-ray (5-20 keV) beam both for diffraction limited focusing and for contrast formation. To provide low vertical beta functions at each undulator, an extra triplet of quadrupoles was added in the middle of the section. We present here the lattice implementation footprint, the different working point under investigations as well as the first results of the measurements on the machine performances.

• O. Marcouillé, P. Berteaud, P. Brunelle, N. Béchu, L. Chapuis, M.-E. Couprie, J.-M. Filhol, C. Herbeaux, A. Lestrade, J.L. Marlats, A. Mary, M. Massal, M.-H. Nguyen, K. Tavakoli, M. Valléau, J. Vétéran
  SOLEIL, Gif-sur-Yvette

The production of high fluxes in the hard X-rays region is a major issue on medium energy storage rings. It requires the installation of Insertion Devices with high magnetic field and a large number of periods. The construction of a superconducting wiggler has been first envisaged but reveals to be maintenance constraining, much more complex and expensive than the permanent magnet technology. A small gap in vacuum wiggler composed of 38 periods of 50 mm has been preferred. The compact magnetic system allows to produce in a limited space a magnetic field of 2.1 T in a small gap of 5.5 mm, whereas an auxiliary counterforce system based on non-magnetic springs compensate the magnetic forces (up to 8.5 Tons) acting between magnet arrays. The gap between jaws and the mechanical deformations have been controlled and corrected. Magic fingers corrections have been also performed to reduce the integrated multipoles and to minimize the 2nd order integrals resulting from the tight width of the wiggler poles. This paper presents the design of the wiggler, the construction, and the results of the measurements after magnetic corrections.