• K. Takayama, T. Adachi, T. Arai, Y. Arakida, M. Hasimoto, T. Kawakubo, K. Koyama, T. Kubo, T. Kubo, H. Nakanishi, A. Takagi, K. Zhang
  KEK, Ibaraki
• T. Kikuchi
  Nagaoka University of Technology, Nagaoka, Niigata
• K.W. Leo
  Sokendai, Ibaraki
• K. Okazaki
  Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture

KEK digital accelerator (DA) capable of accelerating all species of ion* is an induction synchrotron employing no large scale injectors. At the beginning of its operation, Ar ions from the ECR ion source (ECRIS) embedded in the 200 kV high voltage terminal (HVT) are directly injected into KEK-DA though the low energy BT line (LEBT). The permanent magnet ECRIS was assembled at KEK. Its characteristics such as a charge-state spectrum, emittance, and intensity are presented. The 200 kV HVT has been also assembled at KEK. Its voltage stability in the pulse mode operation, where a plasma of 1 msec is created by x-band microwaves at 10 Hz, is discussed. The LEBT consists of the Eintzel lens, momentum analyzer, B magnets with edge focusing, electrostatic chopper**, and a combination of Q magnets. In the upper LEBT from the ion extraction hall to the entrance of the analyzer, possible charge-state ions are contaminated in the space-charge limit and beam focusing is realized through the Eintzel lens and tandem acceleration gaps. In the lower LEBT from the analyzer to the KEK-DA injection point, the lattice has been optimized so as to meet optics matching at the injection point.

*K. Takayama, J. of Appl. Phys. 101 063304(2007), "KEK digital accelerator for material and biological sciences" in this conference
**T.Adachi, "Injection and extraction system" in this conference

• K. Takayama, T. Adachi, T. Arai, Y. Arakida, M. Hasimoto, T. Iwashita, E. Kadokura, M. Kawai, T. Kawakubo, K. Koyama, T. Kubo, T. Kubo, H. Nakanishi, K. Okamura, H. Someya, A. Takagi, M. Wake
  KEK, Ibaraki
• T. Kikuchi, T. Yoshii
  Nagaoka University of Technology, Nagaoka, Niigata
• K.W. Leo
  Sokendai, Ibaraki
• K. Mochiki, T. Sano
  Tokyo City University, Tokyo
• M. Okamura
  RBRC, Upton, Long Island, New York
• K. Okazaki
  Nippon Advanced Technology Co. Ltd., Ibaraki-prefecture
• H. Tanaka
  Iwate university, Morioka, Iwate

A novel circular accelerator capable of accelerating any ions from an extremely low energy to relativistic energy is discussed. A digital accelerator (DA)* is based on the induction synchrotron concept, which had been demonstrated in 2006. All ions are captured and accelerated with pulse voltages generated by induction acceleration cell (IAC). The IAC is energized by the switching power supply, in which power solid-state conductors are employed as switching elements and their tuning on/off is maneuvered by gate signals digitally manipulated from the circulating signal of an ion beam. Acceleration synchronized with the revolution of the ion beam is always guaranteed. The concept is realized by renovating the KEK 500 MeV booster into the DA, introducing a laser ablation ion source. Ion energy of 85-140 MeV/au and intensity of 10⁺⁹ - 10⁺¹⁰ /sec are estimated and these ions will be delivered without any large-scale injector. Companion papers** will discuss more details of instruments of DA. Applications for innovative material sciences and life sciences will be briefly introduced as well as the outline of DA.

*K. Takayam, J. of Appl. Phys. 101 (2007) 063304.
**K.Takayama "Ion source and LEBT", T.Adachi "Injection and extraction system", T.Iwashita "Induction acceleration system" in this conference.

• K. Koyama
  University of Tokyo, Tokyo
• A. Maekawa, H. Masuda, M. Uesaka
  The University of Tokyo, Nuclear Professional School, Ibaraki-ken
• Y. Oishi
  Central Research Institute of Electric Power Industry, Yokosuka-shi, Kanagawa

We are studying the artificial injection of initial electrons into the wakefield for producing stable electron bunch (the charge is 100 pC, the energy stability is better than a few per cent). The objective of our research is to produce 100-keV class monochromatic X-ray pulses for measuring concentrations of nuclear materials in a reprocessing plant. A K-edge densitometry using monochromatic hard x-ray beams is one of the effective technique to measure concentrations of nuclear materials in a reprocessing solutions. An inverse Compton scattering process between an IR-laser beam of 800 nm and high-energy electron bunch of above 80 MeV makes it possible to deliver tunable monochromatic x-rays near K-absorption edges of nuclear materials of 115-129 keV. In order to use in a reprocessing plant, the equipment for the K-edge densitometry must be smaller than a compact car. The only solution to realize the compact system is to use a laser wakefield accelerator instead of a radio frequency linac. An ultra-short ten-TW laser pulse focused on a supersonic jet makes it possible to accelerate electrons up to 100 MeV in a plasma length of 2.5 mm.